Van Norman piston knurling machine

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
Hanzeng
Member
Member
Posts: 99
Joined: Sat Feb 17, 2007 10:17 pm
Location: Casselberry, Florida

Van Norman piston knurling machine

Post by Hanzeng »

This is an oldie, not a benchtop model but a freestanding cast iron machine. Sits covered in the back of my shop and about once every two years is a lifesaver for tightening up a loose engine. Unlike the tabletop knurlers that squeeze the piston skirts, this model has a support arm that rides inside the skirt. First $200 takes it. hanzenginehouse@gmail.com
User avatar
k-star
Guru
Guru
Posts: 1918
Joined: Mon Oct 04, 2004 2:17 pm
Location: york pa

Re: Van Norman piston knurling machine

Post by k-star »

Where are you located?
“If I hit you with this you’re going to be numb, that’s why they call them numb-chucks “Si Robertson
Hanzeng
Member
Member
Posts: 99
Joined: Sat Feb 17, 2007 10:17 pm
Location: Casselberry, Florida

Re: Van Norman piston knurling machine

Post by Hanzeng »

Casselberry, FL on the north side of Orlando
Post Reply