milling head for Bridgeports

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
MotionMachine
Guru
Guru
Posts: 1564
Joined: Thu Sep 16, 2010 10:01 am
Location: Virginia
Contact:

milling head for Bridgeports

Post by MotionMachine »

Here are some pics of the milling head my buddy makes and sells. He has sold over 30 of them with no complaints. One end is for CBN, the other is PCD. They come in R8 with the set-up indicator and one each of the inserts, cost is $1,395. A friend of mine owns a job shop with several CNC machines, he just bought one with a CAT40 spindle and loves it. The profilometer picture is of a block that he did. PM me if interested.
You do not have the required permissions to view the files attached to this post.
User avatar
Dave Koehler
Vendor
Posts: 7197
Joined: Mon Oct 04, 2004 11:19 pm
Location: Urbana, IL USA
Contact:

Re: milling head for Bridgeports

Post by Dave Koehler »

Old thread I know but you didn't leave any info on where and who the maker is.
Dave Koehler - Koehler Injection
Enderle Fuel Injection - Nitrous Charger - Balancing - Nitrous Master software
http://www.koehlerinjection.com
"Never let a race car know that you are in a hurry."
MotionMachine
Guru
Guru
Posts: 1564
Joined: Thu Sep 16, 2010 10:01 am
Location: Virginia
Contact:

Re: milling head for Bridgeports

Post by MotionMachine »

Dave Koehler wrote:Old thread I know but you didn't leave any info on where and who the maker is.
Joe Green Equipment Sales, Blacksburg VA. His phone is 540-552-8978. He also sold head fixtures for mills and supplied one of the milling heads as part of the package. Last I knew, he had 2 or 3 fixtures left with enough milling heads to go with each one so I'm not sure if he has any spares to sell separately. I talk to him every week, I can ask if you'd like. Do you need R-8?
Post Reply