T&S 3 angle tooling, carbide 11/32 pilots
Moderator: Team
T&S 3 angle tooling, carbide 11/32 pilots
Bought all this stuff a while back to start doing head work. Pilots I had custom ground with a .0003 taper...4 of them will handle guide clearance from .0008-.002
There are a few cutters, and what you see in the picture. I'm I to this stuff for well over $1000,
I'll take $600 or best offer.
Email lbhsbz@hotmail.com or call 310-947-7014
-Pat
There are a few cutters, and what you see in the picture. I'm I to this stuff for well over $1000,
I'll take $600 or best offer.
Email lbhsbz@hotmail.com or call 310-947-7014
-Pat
Re: T&S 3 angle tooling, carbide 11/32 pilots
What pilot top size is this set up? What sizes of pilots did you actually have ground? Are the pilots carbide? When the best time to call you?
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: T&S 3 angle tooling, carbide 11/32 pilots
X2
Top sizes as well as pilot sizes
Top sizes as well as pilot sizes
Real Race Cars Don't Have Doors
Re: T&S 3 angle tooling, carbide 11/32 pilots
.385 top sizes....solid carbide
Just measured em again...
.3425-.3427
.3428-.3430
.3430-.3432
.3433-.3436
Just measured em again...
.3425-.3427
.3428-.3430
.3430-.3432
.3433-.3436
Re: T&S 3 angle tooling, carbide 11/32 pilots
There's an 11/32 adjustable steel pilot in there too, still new..just some storage rust that's easily cleaned up wiht scotchbrite.
Re: T&S 3 angle tooling, carbide 11/32 pilots
mind sharing who custom ground your carbide pilots, and what it cost?
Thanks
Thanks
Re: T&S 3 angle tooling, carbide 11/32 pilots
If the sale falls through I am interested in them.Please let me know.
Thank you
Thank you
Mountain Lion Motorsports
Bethel, CT
Bethel, CT
Re: T&S 3 angle tooling, carbide 11/32 pilots
Sold.
I've been looking for the guy's card who I had do the grinding....can't seem to find it. I'll PM those who asked about it when I do find it.
I've been looking for the guy's card who I had do the grinding....can't seem to find it. I'll PM those who asked about it when I do find it.
Re: T&S 3 angle tooling, carbide 11/32 pilots
lbhsbz wrote:Sale Pending
So I recieved my purchase from lbhsbz this evening. Excitedly I opened the package to find that this member had done the absolute best packaging job to insure it got to me unscathed that I have ever seen! Every component was individually wrapped with bubble including every carbide pilot. Then the plastic case containing all the tooling was bubble wrapped, then placed in a box, wrapped again with bublbe wrap and then boxed yet again! Everything is exactly perfect!
I share this with everyone here because in my conversation with this member he indicated he would likely have some other items for sale in the future. If you were considering a purchase from this gentlemen, then please consider my very pleasant experience and his attention to detail in making sure your purchase arrives in perfect order. Thank you sir for your great concern and the excellent purchase I made from you! Take Care!
-
- Pro
- Posts: 479
- Joined: Sun Jun 11, 2006 6:24 pm
- Location: OHIO
- Contact: