JKM flow bench with std or Brezinski tooling
Moderator: Team
JKM flow bench with std or Brezinski tooling
Have a little used JKM 600 flow bench for sale. Believe its S/N 97. Its a 7.5 hp 3 phase 220 volt machine. Not a play toy! have std tools that came with it and ALL printed lit. Bought Brezinski tools for SBC and BBC slider plates and various size bore adaptors. Asking 3200.00 for basic unit. Can negoiate on Brez stuff as needed. Will sell machine without Brez stuff. Located in north cent Ohio. Machine can be operated. Have some new parts for machine. JKM was Jerry-Karen-Malisa [sp?] from Framingham,Mass-Jerry past away some yrs back, I know there are a number of these machines still in use-3 located within 100 miles of me-1 is used by an Ohio Cyl Head Manf. The machines use mostly Granger/Mcmaster-Carr type hardware and Dwyer air flow measurement equpt. ALL currently avail. The machine is stingy with air flow numbers, but heads tested from AFR were very close. Can Crate and ship thru Craters and Freighters out of Cleve. Oh. Al
Some people are so stupid that they dont even know it! - by a famous Hillbilly