started to tool up to do my own headwork but money ran out and priorities changed...
3 angle setup from T&S, one ball head with 3/4 straight shank, 2 ball drivers, 2 large tool holders, one tool setting fixture, long and short bounce spring. I paid about $700, never used any of it, will sell for $500. includes a 90° blade for counterbores as well as a few serdi cutters that I aquired on ebay...new.
Kwik Way valve grinder, old. New power cord and belt. comes with cabinet, everything works, new stones included. $400
Souix valve seat grinding setup. One air driver, one electric driver, one mystery driver, 2 new stoneholders, 2 stone dressers, lots of stones, about 12 new ones, handful of pilots, 2 new expanding pilots...11/32 and 3/8". $700
4 carbide .385 top pilots ground special for 11/32" valves. .3425-.3428, .3429-.3432, .3433-.3435, .3435-.3437. I spent $100 each on the blanks and $75 each to get re-ground, $500 for all 4.
Email lbhsbz@hotmail.com for pictures.
3 angle tooling, KW valve grinder, carbide pilots
Moderator: Team
-
- Expert
- Posts: 934
- Joined: Mon Jan 23, 2006 10:50 pm
- Location:
Re: 3 angle tooling, KW valve grinder, carbide pilots
email me some pics and your location
igrinditshrp@netscape.net
igrinditshrp@netscape.net
results speak for themselves
-
- New Member
- Posts: 31
- Joined: Tue Apr 05, 2011 2:25 am
- Location:
Re: 3 angle tooling, KW valve grinder, carbide pilots
Valve grinder is gone. Make some offers. I'd like this stuff gone.
Re: 3 angle tooling, KW valve grinder, carbide pilots
Do you have a list of what you may have left to sell?