Page 1 of 1

SBC roller cam setup

Posted: Sat Apr 13, 2019 7:55 pm
by partymole
Custom Jones roller cam. Small base circle to clear longer stroke cranks.
.472 in lobe .465 ex lobe
dur @.050 283 in 289 ex
114 lobe sep. 110 intake CL
$200.00 shipped to 48 states
2 sets on PAC 1324 springs. each used 1 season
$150.00 each shipped to 48 states.
1 set of Isky roller lifters. .180 offset intakes. .904 diameter
used 1 season
$150.00 shipped to 48 states
1 set of Crower roller lifters. .180 offset intakes. .904 diameter
used 1 season.
$150.00 shipped to 48 states.
Trend push rods. 3/8 x .080. 8.600 long tapered.
$100.00 shipped to 48 states
Make offer I need this stuff out of the garage.
Can e-mail pictures. Thanks

Re: SBC roller cam setup

Posted: Sun Apr 14, 2019 12:39 pm
by partymole
I do have the cam card for the Jones cam.

Re: SBC roller cam setup

Posted: Wed May 15, 2019 5:38 am
by partymole
Cam is sold! Make offer on the lifters, springs, and push rods.