Page 1 of 1

Wanted Dodge 2bbl intakes

Posted: Sun Mar 03, 2019 2:42 pm
by ProPower engines
Hey guys
I am looking for some 2bbl intakes for a 318/360 suitable for a race engine that is restricted to a cast iron unported intake. Depending on the design I am looking at all options available.
Email me through the board and I will get back to you asap.

Thanks for looking

Re: Wanted Dodge 2bbl intakes

Posted: Sun Mar 03, 2019 2:59 pm
by PackardV8
We've scrapped out several without any analysis of which might be best. When those who know tell us which years to look for, in a month or two the snow might melt enough to begin looking for one.

jack vines

Re: Wanted Dodge 2bbl intakes

Posted: Mon Mar 04, 2019 4:26 pm
by ProPower engines
The best may be from the early 70's to about 78-79 era.
the intake I am really looking for is from a cop car in the mid 70's to mid 80's from the 360 engine.
This had a single barrel carb which was more like a single butterfly of flap but in a 2 bbl carb body design with a different base plate configuration but the carb and intake worked much much better then the largest 2bbl that was available.

The manifold had a open design on the carb mounting flange area which leads me to think they were specific to either marine or cop cars as there was a single barrel carb deal on chrysler marine engines as well.

Keep me posted when the snow melts. [-o<

Re: Wanted Dodge 2bbl intakes

Posted: Mon Mar 04, 2019 7:18 pm
by PackardV8
Wow, that's one I don't believe we've ever seen. Shouldn't be difficult to spot.

jack vines

Re: Wanted Dodge 2bbl intakes

Posted: Mon Mar 04, 2019 10:48 pm
by ProPower engines
They are still out there but not nearly as common as 40 years ago.
We had lots of the old cop cars come through the wrecking yard here over the years and the carbs were real popular for some reason I guess they were N L A from the dealer or rebuilders but the guys that had boats bought them up as OMC discontinued them. #-o

Re: Wanted Dodge 2bbl intakes

Posted: Thu Mar 07, 2019 12:22 am
by 408swinger
Try forabodiesonly.com

I would be amazed if you dont get a bunch of responses.

Re: Wanted Dodge 2bbl intakes

Posted: Sun Mar 10, 2019 11:27 pm
by ProPower engines
Thanks for the tip.
I forgot about that forum. =D>

Re: Wanted Dodge 2bbl intakes

Posted: Wed Mar 20, 2019 4:31 am
by Mummert
I don't know if it is what you're talking about, but I remember seeing a single plane design 2 barrel cast iron oem manifold for the small dodge. I thought it was early 60's passenger car but maybe not. Anyone else familiar with this.

Re: Wanted Dodge 2bbl intakes

Posted: Sat Mar 23, 2019 3:15 am
by ProPower engines
Mummert wrote: Wed Mar 20, 2019 4:31 am I don't know if it is what you're talking about, but I remember seeing a single plane design 2 barrel cast iron oem manifold for the small dodge. I thought it was early 60's passenger car but maybe not. Anyone else familiar with this.
There was a marine intake that was similar to the automotive intake. Either should work just fine so if ya see an intake please let me know.

Thanks again

Dave

Re: Wanted Dodge 2bbl intakes

Posted: Thu Jun 27, 2019 11:16 pm
by Krooser
Seems like the mid-70's Dodge trucks had a higher rise type manifold.

Re: Wanted Dodge 2bbl intakes

Posted: Fri Jun 28, 2019 10:33 pm
by APMachine
Do you have a casting number?

Re: Wanted Dodge 2bbl intakes

Posted: Tue Aug 13, 2019 3:13 am
by Krooser
I found one 2bbl intake you can have....send me a pm.

Re: Wanted Dodge 2bbl intakes

Posted: Mon Aug 19, 2019 10:23 am
by prairiehotrodder
I have 2 from 360's around 1975 - 1979.

Re: Wanted Dodge 2bbl intakes

Posted: Mon Aug 26, 2019 7:40 pm
by 1972ho

Re: Wanted Dodge 2bbl intakes

Posted: Mon Aug 26, 2019 7:44 pm
by ProPower engines
1972ho wrote: Mon Aug 26, 2019 7:40 pm https://sandiego.craigslist.org/esd/pts ... 29840.html Would it be one like this.
Thanks for the tip but I see its the small intake.
the seller also is a little mis-informed as to what it fits. he says BBM and SBM and said maybe even a hemi :lol: :lol:

Thanks for looking out :D