Two (2) 1.45"V x 1.75"T 4150 Carbs For Sale

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
BradH
Expert
Expert
Posts: 608
Joined: Wed Apr 03, 2013 11:34 am

Two (2) 1.45"V x 1.75"T 4150 Carbs For Sale

Post by BradH » Mon Nov 12, 2018 4:41 pm

<< Yeah, I know... it's me -- again -- looking to sell some carbs... :lol: >>

I've got two 4150 carbs w/ 1.45" venturi x 1.75" throttle plates for sale. The builds are similar, but the #2 carb listed is likely suited to an engine with a bit more cam and higher idle speed requirements.

(1) QFT/Proform-type "950" 1.45" venturi x 1.75" throttle 4150 built from all new parts
- QFT/Proform 1.45" venturi "950" main body w/ QFT-machined boosters
- QFT/Proform (purple) 4-emulsion gas billet metering blocks
- QFT/Proform (purple) billet base plate w/ Quick Fuel high-flow slabbed shafts
- QFT/Braswell aluminum fuel bowls with dual sight windows & #6-AN male fuel fittings

Tune:
IAB - .073
MAB - .032
TSR - .081 (8-32 x 1/8" set screws)
IFR - .033 lowered (6-32 x 3/16" set screws)
PV - 4.5
PVCR - .055
Jets - 78 / 86
Nozzles .033 / .033
4-emulsion metering block (6-32 x 3/16" set screws for e-jets)
- 1 - .029
- 2 - plug
- 3 - .029
- 4 - plug
Throttle plate bypass air holes - N/A
.
QFT_Proform 1.45 x 3.jpg
.

(2) Holley Ultra HP / QFT hybrid "950" 1.45" venturi x 1.75" throttle 4150 built from all new parts, except the fuel bowls, which are low-use dyno-time parts
- QFT/Proform 1.45" venturi "950" main body w/ BLP-modified Holley .435" hole x .155" leg downlegs
- Holley Ultra H/XP 5-emulsion gas billet metering blocks
- Holley Ultra HP/BLP billet base plate w/ high-flow profiled shafts
- Holley Ultra HP aluminum fuel bowls with dual sight windows & #6-AN male fuel fittings

Tune:
IAB - .070
MAB - .032
TSR - .081 (8-32 x 1/8" set screws)
IFR - .033 lowered (6-32 x 3/16" set screws)
PV - 4.5
PVCR - .059
Jets - 78 / 88
Nozzles .035 / .035
5-emulsion metering block (Holley shouldered e-jets)
- 1 - .028
- 2 - plug
- 3 - plug
- 4 - .028
- 5 - plug
Throttle plate bypass air holes - .100" x 4
.
Mongrel 1.45 x 3.jpg
.

Both carbs are assembled with...
- Stainless-steel throttle plates & low-profile screws
- Stainless-steel high-flow accelerator pump screws & check needles
- GFLT alcohol-resistant accel. pump diaphragms
- BLP needle & seat assemblies
- Non-stick QFT or BLP metering block & fuel bowl gaskets

Each carb will come w/ a detailed build sheet that covers all the components and as-delivered baseline tune settings.

Both carbs are priced to sell at $600 EACH, including ground shipping & insurance in the lower 48 United States.
- Sorry, NO international shipments, NO cashier's checks, and NO PayPal
- I accept only U.S.P.S. Money Orders or cash as payment

PM me here, or text me at 7zero3.threeOne7.7nine8seven. I'm in Virginia outside of Washington, D.C., so please keep in mind I'm on Eastern Standard Time.

BradH
Expert
Expert
Posts: 608
Joined: Wed Apr 03, 2013 11:34 am

Re: Two (2) 1.45"V x 1.75"T 4150 Carbs For Sale

Post by BradH » Wed Nov 28, 2018 6:00 pm

11.28.2018 - Price reduction for QFT/Proform-type "950" only to $550!

BradH
Expert
Expert
Posts: 608
Joined: Wed Apr 03, 2013 11:34 am

Re: Two (2) 1.45"V x 1.75"T 4150 Carbs For Sale

Post by BradH » Wed Dec 05, 2018 2:48 pm

*** 12.5.2018 - Now accepting PayPal; purchaser pays the 3% transaction fee and must provide a verifiable shipping address. Thanks! ***

Post Reply