Custom ground by Comp Cams roller cam. Small base circle for long stroke small blocks.
Intake 1268 lobe adv dur 320, @.050 284, lobe lift .476
EX 1293 lobe adv dur 341, @.050 300, lobe lift .462
ground for 1.6 rockers and .903 Di lifters
$200.00
Isky .903 lifters with bushing. Off set intakes.
Used less that 75 passes on above cam.
$200.00
Or $350.00 for both.
PM or E-mail (scoop@pa.net) with any questions.
roller cam+lifters SBC
Moderator: Team
Re: roller cam+lifters SBC
Make offer. Need then out of my garage.
The older I get,the faster I think that I was?
Re: roller cam+lifters SBC
I also have a one season old set of PAC-1324 springs that were used with this set-up.
Asking $100.00
Asking $100.00
The older I get,the faster I think that I was?