roller cam+lifters SBC

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
partymole
Member
Member
Posts: 50
Joined: Sat Jan 14, 2006 9:29 am
Location: Newville PA

roller cam+lifters SBC

Post by partymole » Sun Jun 10, 2018 7:00 am

Custom ground by Comp Cams roller cam. Small base circle for long stroke small blocks.

Intake 1268 lobe adv dur 320, @.050 284, lobe lift .476
EX 1293 lobe adv dur 341, @.050 300, lobe lift .462

ground for 1.6 rockers and .903 Di lifters
$200.00

Isky .903 lifters with bushing. Off set intakes.
Used less that 75 passes on above cam.
$200.00
Or $350.00 for both.

PM or E-mail (scoop@pa.net) with any questions.
The older I get,the faster I think that I was?

partymole
Member
Member
Posts: 50
Joined: Sat Jan 14, 2006 9:29 am
Location: Newville PA

Re: roller cam+lifters SBC

Post by partymole » Thu Jun 21, 2018 1:20 am

Make offer. Need then out of my garage.
The older I get,the faster I think that I was?

partymole
Member
Member
Posts: 50
Joined: Sat Jan 14, 2006 9:29 am
Location: Newville PA

Re: roller cam+lifters SBC

Post by partymole » Wed Jul 04, 2018 2:45 pm

I also have a one season old set of PAC-1324 springs that were used with this set-up.
Asking $100.00
The older I get,the faster I think that I was?

Post Reply