NEW RHS RAISED RUNNER STEELHEADS

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
perfconn
Member
Member
Posts: 160
Joined: Wed Nov 04, 2009 9:07 am

NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn » Wed Jun 06, 2018 4:42 pm

Brand new set of RHS 23* raised runner steelheads.These heads were ported by Rons Porting Service.They have 250cc intake runners and 51cc chambers.They are valve jobbed for 2.100 & 1.600 valves.Heads are bare.Pictures & Flow sheet are available by email.They use standard 23* headers.

Price-$3200.00 plus shipping.
E-mail: terry.marciaburnett@gmail.com
Phone: 1-865-567-6943
Attachments
IMG_20170621_161059.jpg

perfconn
Member
Member
Posts: 160
Joined: Wed Nov 04, 2009 9:07 am

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn » Fri Jun 08, 2018 10:20 am

Only picture I have right now.[attachment=0]0928171514a_0003.jpg[/attachment]
Attachments
0928171514a_0003.jpg
0928171514a_0003.jpg (20.21 KiB) Viewed 1295 times

perfconn
Member
Member
Posts: 160
Joined: Wed Nov 04, 2009 9:07 am

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn » Sun Jul 08, 2018 9:33 pm

Better pictuures.[attachment=0]IMG_20180614_112421.jpg[/attachment]
Attachments
IMG_20180614_112421.jpg

perfconn
Member
Member
Posts: 160
Joined: Wed Nov 04, 2009 9:07 am

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn » Sun Jul 08, 2018 9:34 pm

Intake side[attachment=0]IMG_20180614_112245.jpg[/attachment]
Attachments
IMG_20180614_112245.jpg

perfconn
Member
Member
Posts: 160
Joined: Wed Nov 04, 2009 9:07 am

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn » Sun Jul 08, 2018 9:35 pm

Chambers[attachment=0]IMG_20180614_112552.jpg[/attachment]
Attachments
IMG_20180614_112552.jpg

perfconn
Member
Member
Posts: 160
Joined: Wed Nov 04, 2009 9:07 am

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn » Mon Jul 16, 2018 3:50 pm

Dyno pull of a 360ci round track single 4 barrel with similar heads.[attachment=0]IMG_20161104_194754.jpg[/attachment]
Attachments
IMG_20161104_194754.jpg

SupStk
Guru
Guru
Posts: 1385
Joined: Wed Jun 22, 2005 6:25 pm
Location: Box Elder, SD

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by SupStk » Mon Jul 16, 2018 7:28 pm

Good number for both flow and dyno results.
I'm curious what class of racing these heads are targeted for?
Assume custom intake or spacers are required?
Shaft rockers needed?
Monty Frerichs
B&M Machine

perfconn
Member
Member
Posts: 160
Joined: Wed Nov 04, 2009 9:07 am

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn » Mon Jul 16, 2018 8:49 pm

Shaft rockers with .450 offset on intake are needed.I normally use the Edelbrock 2926 raised runner intake but about any raised runner intake will work without spacers.I have used the 2968 Edelbrock but I think that engine had a Holley 300-41 but they are hard to find.I build these engines for dirt track steelhead class but I think some NHRA econo dragster classes use them.This is a brand new set ported by Rons that I don't need.I think RHS quit making them but a few of them are still available.This dyno sheet is of an engine sold to a dude in South Carolina.[attachment=0]Brant Carey 361ci.jpg[/attachment]
Attachments
Brant Carey 361ci.jpg

winterhoff
Member
Member
Posts: 64
Joined: Fri Apr 06, 2007 4:59 pm
Location: St. Charles, MO
Contact:

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by winterhoff » Tue Jul 17, 2018 8:03 am

I have several new sets of the RHS raised runner heads untouched still in the box if anybody is interested
Ron
636 447 4042

perfconn
Member
Member
Posts: 160
Joined: Wed Nov 04, 2009 9:07 am

Re: NEW RHS RAISED RUNNER STEELHEADS

Post by perfconn » Thu Aug 16, 2018 8:38 pm

Price dropped to $3000.00 plus shipping

Post Reply