Wiseco piston RFQ

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
PackardV8
Guru
Guru
Posts: 7619
Joined: Sun Jul 30, 2006 2:03 pm
Location: Spokane, WA

Wiseco piston RFQ

Post by PackardV8 »

Anyone direct with Wiseco?

I need a quote and delivery time on a two sets of eight forged pistons which could be made from one of their sport compact or powersport blanks.

91mm bore
33mm compression height
19mm pin
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
bubbabbc
Pro
Pro
Posts: 256
Joined: Sun Dec 23, 2007 9:22 am
Location:

Re: Wiseco piston RFQ

Post by bubbabbc »

Go to Wiseco's website and download their custom piston order form. Then send the completed form to the Wiseco dealer of your choice and they can give you a quote. It's easy and then you get the pistons you want.
In-Tech
Vendor
Posts: 2812
Joined: Wed Apr 21, 2010 4:35 am
Location: Fresno, CA

Re: Wiseco piston RFQ

Post by In-Tech »

I am curious why Wiseco is your only consideration.
Heat is energy, energy is horsepower...but you gotta control the heat.
-Carl
ALKYAL
Expert
Expert
Posts: 512
Joined: Mon Aug 10, 2009 10:11 pm
Location: OHIO

Re: Wiseco piston RFQ

Post by ALKYAL »

They do their own forgings In-House. Have gotten forgings from them directly and sent them off to Piston Manfs. Much quicker for finished Pistons.
Some people are so stupid that they dont even know it! - by a famous Hillbilly
PackardV8
Guru
Guru
Posts: 7619
Joined: Sun Jul 30, 2006 2:03 pm
Location: Spokane, WA

Re: Wiseco piston RFQ

Post by PackardV8 »

Thanks for the replies. No, Wiseco is not the only consideration, but since they're big into import/cycle/off-road small diameter forgings, it's a start. Who else would you suggest for those specs?
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
Post Reply