Sbf stuff

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
kcengines
HotPass
HotPass
Posts: 122
Joined: Wed Aug 15, 2012 5:46 pm
Location: VA

Sbf stuff

Post by kcengines »

edelbrock 29285 super victor efi with fuel rails (new) 375.00
Bullet sbf hydraulic roller cam 279/284- 228/230 108.5lca 250.00
241/247 .625 lift 113lca 250.00

Jones hydraulic roller 226/230 .340/.340 at lobe 109 lca
300.00
Cam motion Sr 246/262 .397/.375 at lobe 112lca 250.00

Comp hft. 254/254. 206/206 .454/.454 109lca 100.00
Accufab headers for fox mustang 1 3/4 to 1 7/8 3in.collector jet hot coated 500.00
39 lb. Ford injectors 125.00
Trick flow powder coated grey valve covers 100.00
Mass flo 4150
throttle body and high flow maf meter 600.00
351w 4.250 stroke 4340 crankshaft 550.00
Send me a PM I will give my phone# for those interested
kcengines
HotPass
HotPass
Posts: 122
Joined: Wed Aug 15, 2012 5:46 pm
Location: VA

Re: Sbf stuff

Post by kcengines »

Bump
cgarb
Guru
Guru
Posts: 2005
Joined: Wed Jul 09, 2014 11:50 am
Location: Maryland

Re: Sbf stuff

Post by cgarb »

What is the lift figures on the Bullet Hydraulic roller cam and what was it ground for?
kcengines
HotPass
HotPass
Posts: 122
Joined: Wed Aug 15, 2012 5:46 pm
Location: VA

Re: Sbf stuff

Post by kcengines »

bump
groberts101
Guru
Guru
Posts: 1980
Joined: Sat Mar 08, 2008 3:08 pm
Location: Minneapolis

Re: Sbf stuff

Post by groberts101 »

Hi. Wondering if you still have the Jones roller cam and if so, do you have the cam card with it as well? Or is it ID'd so I could call him for the spec's?

Thanks, Greg
kcengines
HotPass
HotPass
Posts: 122
Joined: Wed Aug 15, 2012 5:46 pm
Location: VA

Re: Sbf stuff

Post by kcengines »

Bump
Post Reply