Small block Mopar Headers - TTI shorty & Eds

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
Mattax
Member
Member
Posts: 191
Joined: Mon Mar 07, 2011 10:39 am
Location: Phila. Pa
Contact:

Small block Mopar Headers - TTI shorty & Eds

Post by Mattax »

Two very different sets of small block Chrysler headers.

Early production TTI Shorties, mocked up but never used, with early production headpipes.
* 1 5/8 primaries, 2.5" collector.
* Coated with Swain "white lightning" (which is zirconium dioxide probably with with ytrium).
* This is an early production set.
Should be good fit in a B or E body.
On an '67 and up A-body, maybe, but NO guarentee.
- Head pipes may hit floor pan (new version may fix this)
- column shift linkage interferes
More pictures and links showing fit: http://www.heritech.org/cuda/TTIshorty.html
$ 510 (plus shipping)
In Downington, Pa. Can be delivered to Mopars at Carlisle.
PS-after-mockup.jpg
Headers By Ed, Well used with road damage
* 1 5/8" equal length primaries (34" IIRC), 3" semi-merge collectors.
* Multi-piece design makes installation relatively easy, even in A-bodies.
* Lower tubes should be repaired. Routing under the K-frame and steering linkage limits use to smooth pavement.
* Workmanship was high quality and the design was good for access. Not recommended for bad roads due to limited ground clearance.
$ 500 and tell me what your going to use it for. (plus actual shipping)
In Philadelphia, Pa.
More pictures: http://www.heritech.org/cuda/HByE.html
Eds-Driverside-midview.JPG
You do not have the required permissions to view the files attached to this post.
Mattax
Member
Member
Posts: 191
Joined: Mon Mar 07, 2011 10:39 am
Location: Phila. Pa
Contact:

Re: Small block Mopar Headers - TTI shorty & Eds

Post by Mattax »

TTI Shorties Sold.
Header By Ed - Available
Post Reply