WTB Y Block Ford Parts

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
liqu
New Member
New Member
Posts: 28
Joined: Sun Apr 05, 2015 1:22 pm

WTB Y Block Ford Parts

Post by liqu » Sun Jun 11, 2017 6:27 pm

Ported heads for a Y Block Ford, steel cranks, or any other modern (if possible) speed equipment (no 3x2 manifolds) good or bad.

BirdMan
Expert
Expert
Posts: 600
Joined: Mon Jan 19, 2009 11:19 am
Location: Topeka, KS

Re: WTB Y Block Ford Parts

Post by BirdMan » Mon Jun 12, 2017 1:36 pm

I believe I have a stock 292 crank if you are int.
Dale C.

liqu
New Member
New Member
Posts: 28
Joined: Sun Apr 05, 2015 1:22 pm

Re: WTB Y Block Ford Parts

Post by liqu » Mon Jun 12, 2017 3:50 pm

Hi, I am looking for steel cranks, steel cranks have no center counter weight, and the flywheel flange is round (no 1/2 moon cut out)

pdq67
Guru
Guru
Posts: 7521
Joined: Thu Mar 04, 2010 8:05 pm

Re: WTB Y Block Ford Parts

Post by pdq67 » Thu Jun 29, 2017 11:23 pm

liqu wrote:Hi, I am looking for steel cranks, steel cranks have no center counter weight, and the flywheel flange is round (no 1/2 moon cut out)
Didn't the old 292" truck engines have SOME forged cranks in them?

pdq67

liqu
New Member
New Member
Posts: 28
Joined: Sun Apr 05, 2015 1:22 pm

Re: WTB Y Block Ford Parts

Post by liqu » Fri Jun 30, 2017 7:59 pm

Yes, most 3/4 ton and up, 1961 and newer trucks have a steel crank, however most will need a snout repair (loose damper)

Post Reply