Page 1 of 1
BBC alternator bracket
Posted: Wed Feb 08, 2017 12:34 pm
by prairiehotrodder
(NEW DESIGN) laser cut 1/4" mild steel mid mount alternator bracket for a big block chevy with long water pump and 9.8 deck height. Works great, uses a much shorter belt to reduce belt throwing and positions the alternator much lower for a cleaner look. Weighs one pound less than the stock 2 piece bracket. Uses your stock alternator pivot bolt and spacer $50 shipped USA or Canada 306-752-5558
$50 USD shipped to USA
$50 canadian dollars shipped to Canada
pay by paypal or E-transfer
Picture 138.jpg
Picture 467.jpg
Re: BBC alternator bracket
Posted: Mon Mar 06, 2017 4:47 pm
by prairiehotrodder
still available.
Re: BBC alternator bracket
Posted: Mon Mar 06, 2017 5:35 pm
by PackardV8
Is this a one-and-only or something you make? I might need something similar with different mounting holes.
Re: BBC alternator bracket
Posted: Thu Jun 22, 2017 5:31 pm
by USMC_Spike
That seems upside down.
Will it work the other way too?
Re: BBC alternator bracket
Posted: Thu Jun 22, 2017 6:56 pm
by prairiehotrodder
Its a very simple bracket that just flips the alternator upside down from its stock location. It still pivots on the same bolt. It is $50 shipped.
Re: BBC alternator bracket
Posted: Thu Jun 22, 2017 7:00 pm
by ProPower engines
Much better design then the original bracket where too many misalignments can be found in custom engines where using the end intake bolt and a bolt near the stat housing then find the pulley is cocked creating a belt running off center line and wearing the side more.