Looking for a used Holley 0-80507, which is the 390cfm double pumper. it is going on a 2.8L nissan. It does not have to be new or rebuilt, it just has to be a rebuildable core at the very least.
A knock-off/ oem with the holley bolt pattern will also work.
Thank You,
Ian
Wanted- Holley 390 Double Pumper
Moderator: Team
-
- New Member
- Posts: 1
- Joined: Wed Jan 11, 2017 7:47 pm
- Location:
Re: Wanted- Holley 390 Double Pumper
Can you use an additional 50# of Holley parts along with it? I haven't done one in years and it's time to clear the shelf. IIRC, there's a plastic compartment box with jets, springs, pump cams, pumps and misc, plus bodies, bowls and at least one good 390. I will have to confirm it's a double pumper. Been so long, memory isn't clear on that.
Jack Vines
Studebaker-Packard V8 Limited
Obsolete Engineering
Studebaker-Packard V8 Limited
Obsolete Engineering