SpeedTalk Store - Opinion Columns

360ci RAISED RUNNER STEELHEAD

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

360ci RAISED RUNNER STEELHEAD

Postby perfconn » Wed Oct 05, 2016 6:44 pm

Champ aluminum dry sump oil pan w/3 # 12 pickups
Comp 50mm billet roller cam
HVH ported Holley intake
Isky EZ roll .904 bushing style lifters
Dyers 535 gram Honda journal rods w/ARP 3.5 bolts
HVH ported RHS raised runner steelheads
Bowtie 1184 block w/50mm-4.145 bore-.904 bushed lifter bores
Crower Ultralite 38# crank w/Honda rods-2.300 mains-1625 gram bobweight
Racetek 4cc dome pistons
2.100-1.600-5.490-11/32 titanium valves
T&D 1.85-1.85 shaft rockers
Stewart aluminum short water pump
Double groove 30% reduction pulleys
Peterson pop off valve
Cast aluminum valve covers
PSI 1240 springs
Manley titanium retainers
ATI balancer
MSD crank trigger
Moroso billet distributor
Scott plug wires

Peak torque-531.5 # @ 5400rpm
Peak hp-703.4 @ 7500rpm

Fresh off dyno-$16,500.00
Pictures & dyno sheet: terry.marciaburnett@gmail.com
Phone: 865-567-6943
perfconn
Member
Member
 
Posts: 92
Joined: Wed Nov 04, 2009 9:07 am

Re: 360ci RAISED RUNNER STEELHEAD

Postby perfconn » Sat Nov 19, 2016 8:00 pm

Engine was dynoed with an 1.400 venturi carburetor and Renegade 112 gas.
perfconn
Member
Member
 
Posts: 92
Joined: Wed Nov 04, 2009 9:07 am

Re: 360ci RAISED RUNNER STEELHEAD

Postby perfconn » Tue Feb 14, 2017 9:15 pm

Price has dropped to $16,000.00


Last bumped by perfconn on Tue Feb 14, 2017 9:15 pm.
perfconn
Member
Member
 
Posts: 92
Joined: Wed Nov 04, 2009 9:07 am


Return to Race Cars & Parts - For Sale or Wanted

Who is online

Users browsing this forum: No registered users and 2 guests