wtd mopar rods 6.76 1.09 pin
Moderator: Team
wtd mopar rods 6.76 1.09 pin
Hi looking for some good used rods for mopar big block must be 1.09 pin hole. Please ema il me 71mervin@gmail.com thx
Re: wtd mopar rods 6.76 1.09 pin
If the OP is still looking, he'll probably have better luck sourcing parts for Mopars by joining moparts.com and posting adds on the BB Engine Parts Wanted or Race Parts Wanted sections.
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: wtd mopar rods 6.76 1.09 pin
526 turbo wrote:Hi looking for some good used rods for mopar big block must be 1.09 pin hole. Please ema il me 71mervin@gmail.com thx
What journal size are you working with??
H beam or I-beam rod??
Real Race Cars Don't Have Doors
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: wtd mopar rods 6.76 1.09 pin
For the cost just but new rods!!
Scat has some good rods and they are not expensive.I just got a set for a 440 and they were very reasonable in cost compared to resizing someone else's junk.
Scat has some good rods and they are not expensive.I just got a set for a 440 and they were very reasonable in cost compared to resizing someone else's junk.
Real Race Cars Don't Have Doors