Wanted Gen 1 Bow tie that will finish @ 4.145 [+.020]
Moderator: Team
Wanted Gen 1 Bow tie that will finish @ 4.145 [+.020]
Looking for a Gen 1 bowtie that will finish @ +.020 bore. That block would have Reg. cam bearings [Non-Roller] Can be a wet or Dry sump block [ie Rear Cap] Lifter bores .842 to .904 size. Also a Std pan rail. Would also be interested in aftermarket Blocks that have STEEL caps [Straight or Angled bolts/studs]. A Rocket Block would also work. Thanks
Some people are so stupid that they dont even know it! - by a famous Hillbilly