SBC heads ie.

[jdracing]

Clearing out some parts around my shop:

1 pair Dart Pro 1 CNC 227 SBC heads, Angle milled .110, 60 cc chambers, new Comp Roller springs (1.55 dia. 240/600#). Titanium 10 deg. retainers, Ferrea Comp Plus SS vlvs. 2.08/1.6. Fresh vlv. job. Ready to bolt on. $1500.00.

1 pair Dart 215 angle plug 64 cc SBC Iron Eagle heads, 10 deg. steel retainers, 2.055/1.6 SS Ferrea vlvs. Fresh vlv job, decked. New flat tappet/hyd. roller springs 1.54 dia. Decked and ready to bolt on. $750.00.

1 pair Dart 215 angle plug 49 cc SBC Iron Eagle heads, 10 deg. titanium retainers, 2.055/1.6 SS valves, New 1.44 dia. flat tappet vlv. springs. Heads never installed on any engine. Only vlvs. have been used, 25 nights on another engine, reason for vlv. removal. Switched that one to hollow stem vlvs. $800.00.

1 Howards Mech. Roller Cam. Int. .418/277 @ .050, Ex. .421/286 @ .050 108 LC. Ran 2 or 3 nights. Likes big cubes and comp. $200.00.

3 Lunati splayed 400 blk. main caps with 1 Comp. Products steel front main cap strap. Front strap never installed. $125.00

8 very good SRP dome pistons/pins. 4.040 for 3.48/3.5 stroke 6'' rod. $350.00.

1 Edelbrock Vic JR. int. man. 2975. $100.00

Plus shipping from Iowa. Pay Pal or pick it up with cash. Call Dave at 641-424-6200. Leave message on machine, I check it every day.

[jdracing]

Pistons, 49cc heads and Vic JR. intake no longer available. Thank You for calls.

[jdracing]

Still have Dart alum. CNC heads $1300.00. On 374ci engine made 650hp on alky/ 638 gas on a honest dyno with 15 to 1 compression, Bullet cam. Will give cam number and specs. on request. Engine turned to 8800 in USMTS pre spec. engine days, and made power all the way. Work good in open headed rules. Always ran up front and won some.

[jdracing]

Person for 49cc heads hasn't shown up. They're back on the sale table.

[ProPower engines]

Are the 400 caps new??
Let me know.

Dave

[jdracing]

No, Caps used once.