Cleaning out the Attic Sale, a little bit of everything

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
desotoman
New Member
New Member
Posts: 23
Joined: Wed Feb 24, 2010 6:12 pm
Location:

Cleaning out the Attic Sale, a little bit of everything

Post by desotoman »

I am posting this ad for a friend so please contact him if interested or need more details. His contact information is at the bottom of the ad. Thanks.

(1) Kinsler SBC Chevy, magnesium 2-7/16th, 3 piece, big port injector. 6-sets of nozzles, some for gas and some for fuel, for motor sizes that include 255”, 302”, and 270” engines. Powder coated castings. Perfect condition. 48 nozzles, several dozen by pass pills, and a Kinsler fuel hydrometer included as well. New purchase price for these parts would be $8,000. Can be yours today for $2500.

(2) 426 Hemi dual magneto drive with tach output and 2- Mallory
Mag III’s, tuned up by Tom Cirello. $2500, for all three.

(3) Halibrand magnesium Lola Can Am wheels 15x9 and 15-14. Period tires (museum) all. $2000.

(4) 426 Hemi Hilborn 8 bolt per head injector 2.875 throats, 6" stacks Enderle "K" barrel valve. Enderle nozzles, w/tips for alcohol or nitro. Big Waterman RED pump included. $2750

(5) 3 Waterman Red Pumps, 18.20 GPM flow. Race ready, all three $2700.

(6) 2 NEW 6.00-16 Firestone Bonneville tires $1000 pair.

(7) 2 NEW Firestone/Allstate/Bonneville 6.70-15 $1000 pair. Stored for many years and never run. Mounted on steel 5-inch wide x 5.5 bolt circle rims.

(8) OLD CAE, sprint car front axle, and Ford Spindles, with spring. Used hard, $150.

(9) New B & J three speed with reverse, magnesium cases, coated. 1.40 and 1.17 gear sets. $3000

(10) Halibrand champ car open tube q/c with 5 x 5.5 knock offs. 36" flange to flange. $1500 (4.11 Ring and Pinion)

(11) Race Boat 180" Ford 6 cyl Falcon engine. Algon Injection, Joe Hunt magneto, zoomies, $2000 OBO the injection, pump drive, and magneto are worth the 2 grand alone. (Built by Red Reeder in California)

(12) Halibrand Midget magnesium 12 x 6 and 12 x 8 wheels. 6 pin drive, NO damage $2000 for the set of 4.

(13) New Whipple alcohol screw blower (dyno time only) #150 perhaps the last A980 Art imported. Not NHRA legal but anywhere else OK and they make BIG power. $7,000, includes bag and restraint. This model does not have the built in injector

(14) 426 hemi 16 bolt blower manifolds, magnesium or aluminum. $500 each. Several models to choose from.

(15) 426 dual quad intake with two 660 double pumper Holley carburetors, Off of a race boat. $1500

(16) Hemi 426 valve covers, Donavan (with dual breathers), KB, Stage V, Jay Roach, etc. $400 up.

(17) New Chromed, forged, Hemi crank, Crankshaft Specialties, 3.75” stroke, with BB Chevy rod size. $750

(18) 426 Hemi, Used, magnafluxed perfect and NO damage ever, 3.48 stroke Kellogg Hemi forged crank $750

(19) Waterman oil pump system for 426 vintage 1980's good condition with swing pickup, $450

(20) Hilborn 175-2 pump used, flowed at 12.65 GPM. $350

(21) Lamborghini 5000S "K" Borsch fuel injection built by Bob Wallace for the '84 and '85 carburetor cars to get them into the country passing the emission standards. Fits 12 cylinder mid '80's Countach only, Cost $25,000 in the mid '80's to have built. You can own it for $2500. This was on the Earl's plumbing exhibit car at SEMA for several years and is fully polished and chromed. It makes more power and runs better than the Weber carburetors did.

(22) 426 Hemi race factory Gold ignition box and crank trigger parts. $300 for box and trigger parts.

(23) 53’-55’ Cad Eldorado dual quad intake bare $200 (factory part)

(24) Barnes oil dry sump pump with fuel pump drive off back Rotors, perfect condition. $400

(25) Weaver three stage, dry sump pump, one new and one used. Used $400, New $600.

(26) SBC Magnesium front cover with water pump on crank, and dry sump pump on cam. (dyno time only) $750

(27) M and H front runners 22.5 " x 15" mounted never run $200 pr.

(28) 426 Hemi full set of rockers, stands, shafts, complete assembly $1750. (Original race equipment)

(29) New 1997 Plymouth Prowler, one of less than 360 made that year. Still has tits on the tires and the plastic on the floor mats. 1971 miles. $37,500 ("best for the buck" factory hot rod ever made)

(30) 2002 Ford F450, extra cab trailer hauler, alloy bed, air ride, 7.3 diesel, auto w/OD, a/c c/c p/w p/d no damage history, 132,000 original miles, fresh tires, transmission service, and belts, radiator and hoses. Stored inside and does not have any issues. $25,000.

I can fax or email photos and data so don't be bashful,

Marlo (503) 678-2678. Email: Mtreit@aol.com Oregon, USA
old_chopper
New Member
New Member
Posts: 44
Joined: Tue Aug 27, 2013 4:55 pm
Location:

Re: Cleaning out the Attic Sale, a little bit of everything

Post by old_chopper »

You have an awesome attic!
Mohr HP
New Member
New Member
Posts: 5
Joined: Fri Aug 14, 2015 8:34 am
Location:

Re: Cleaning out the Attic Sale, a little bit of everything

Post by Mohr HP »

Looking for single plug cast 426 street hemi valve covers with centered single breather hole. Got anything?
desotoman
New Member
New Member
Posts: 23
Joined: Wed Feb 24, 2010 6:12 pm
Location:

Re: Cleaning out the Attic Sale, a little bit of everything

Post by desotoman »

Sold some Valve Covers, Lots of stuff left.

I can fax or email photos and data so don't be bashful,

Marlo (503) 678-2678. Email: Mtreit@aol.com Oregon, USA

I am posting for a friend so you must contact him, contact information above. Thanks, Tom
desotoman
New Member
New Member
Posts: 23
Joined: Wed Feb 24, 2010 6:12 pm
Location:

Re: Cleaning out the Attic Sale, a little bit of everything

Post by desotoman »

I am posting for a friend so you must contact him, contact information above. Thanks, Tom

I can fax or email photos and data so don't be bashful,

Marlo (503) 678-2678. Email: Mtreit@aol.com Oregon, USA
Post Reply