New Edelbrock Victor Jr Heads with Full Portwork by Mondello
Moderator: Team
New Edelbrock Victor Jr Heads with Full Portwork by Mondello
$2,800 - New Edelbrock Victor Jr. heads for small block Chevy with full portwork by Mondello. Never bolted on an engine.
If interested, please send PM. I am located NW of Houston, Texas.
Will ship parts and split shipping cost within lower 48 states...... Payment by US Postal Money Order accepted.
If picking up parts locally, cash on receipt...... No checks, MOs nor credit cards if picking up locally.
All sales are final......
Description (priour to port work)......
http://www.edelbrock.com/automotive/mc/ ... r-sb.shtml
I had Mondello rework these 23 degree heads for a 427 stroker small block as an affordable alternative to 18 degree or 15 degree heads.
I asked Modello to port these heads so as to maximize flow at valve lifts below 0.550". I was looking for a flow rate for this engine of at least 300 cfm at that lift.
The specs Mondello gave me are as follows......
* Edelbrock Victor Jr. Aluminum Heads Fully Ported By Mondello Racing - 23 degree with standard valve spacing (no offset rockers required)
* 65cc Combustion Chambers, polished
* 2.08" intake X 1.60" exhaust valve sizes - Stainless Steel Pro-Flo with 5-angle valve job
* Intake Ports - 2.35" High X 1.40" Wide = 3.25 sq. in. cross section at port opening (allowing for rounded corners) - Pushrod pinch point measures 2.80 sq. in.
* Exhaust Ports - 1.65" High X 1.65" Wide = 2.68 sq. in. cross section at port opening (allowing for rounded corners)
* Dual Valve Springs Set @ 140 lb. seat pressure / 340 lb. open / cryogenic stress relieved
* P.C. Teflon Valve Guide Seals
Flow @ 28 in. (no pipe)
* LIFT INTAKE EXHAUST
0.100" 071.00 063.00
0.200" 145.00 113.00
0.300" 205.00 157.00
0.400" 260.00 190.00
0.500" 306.00 205.00
0.550" 313.00 211.00
0.600" 320.00 217.00
Best regards and thanks for your interest,
Harry
If interested, please send PM. I am located NW of Houston, Texas.
Will ship parts and split shipping cost within lower 48 states...... Payment by US Postal Money Order accepted.
If picking up parts locally, cash on receipt...... No checks, MOs nor credit cards if picking up locally.
All sales are final......
Description (priour to port work)......
http://www.edelbrock.com/automotive/mc/ ... r-sb.shtml
I had Mondello rework these 23 degree heads for a 427 stroker small block as an affordable alternative to 18 degree or 15 degree heads.
I asked Modello to port these heads so as to maximize flow at valve lifts below 0.550". I was looking for a flow rate for this engine of at least 300 cfm at that lift.
The specs Mondello gave me are as follows......
* Edelbrock Victor Jr. Aluminum Heads Fully Ported By Mondello Racing - 23 degree with standard valve spacing (no offset rockers required)
* 65cc Combustion Chambers, polished
* 2.08" intake X 1.60" exhaust valve sizes - Stainless Steel Pro-Flo with 5-angle valve job
* Intake Ports - 2.35" High X 1.40" Wide = 3.25 sq. in. cross section at port opening (allowing for rounded corners) - Pushrod pinch point measures 2.80 sq. in.
* Exhaust Ports - 1.65" High X 1.65" Wide = 2.68 sq. in. cross section at port opening (allowing for rounded corners)
* Dual Valve Springs Set @ 140 lb. seat pressure / 340 lb. open / cryogenic stress relieved
* P.C. Teflon Valve Guide Seals
Flow @ 28 in. (no pipe)
* LIFT INTAKE EXHAUST
0.100" 071.00 063.00
0.200" 145.00 113.00
0.300" 205.00 157.00
0.400" 260.00 190.00
0.500" 306.00 205.00
0.550" 313.00 211.00
0.600" 320.00 217.00
Best regards and thanks for your interest,
Harry
Re: New Edelbrock Victor Jr Heads with Full Portwork by Mond
These heads are still available.
Thanks,
Harry
Thanks,
Harry
Re: New Edelbrock Victor Jr Heads with Full Portwork by Mond
New in box ported Victor Jr. Heads with cryogenic treatment are still available.
HB
HB
Re: New Edelbrock Victor Jr Heads with Full Portwork by Mondello
Price drop - $2,600 plus shipping. Price good through end of August, 2018.
Thanks,
Harry
Thanks,
Harry
Price drop. First $2,300 takes them.
Price drop...... $2,300. Good through August 31. If not sold by then, we will use these heads on my son's engine.
You won't find a better set of fully reworked 300 + cfm SBC heads still new, in box at this price. If interested, send PM and we'll work out details.
Thanks,
Harry
You won't find a better set of fully reworked 300 + cfm SBC heads still new, in box at this price. If interested, send PM and we'll work out details.
Thanks,
Harry
Re: New Edelbrock Victor Jr Heads with Full Portwork by Mondello
* Last bump for ported Victor Jr. heads. If you need these heads for your race car or for your big inch stroker small block Chevy...... Now is the time to act, gentlemen. You won't find another set like them, especially at this low price.
Thanks,
Harry
Thanks,
Harry