FS: Ferrea, REV, Manley Ti, Del West, CP 4.140" / 3.320"

[6spd_ek]

A good friend of mine passed away last year and left his 85 year old mother a bunch of parts I am now trying to sell. Many items are listed on ebay but I'd be glad to end the auction early. All parts are brand new in the box

Manley Pushrods $50 per set
#25768 7.650" 5/16
#25718 8.600" 5/16
8.380 3/8
9.450 3/8
8.575 3/8
9.300 3/8
9.025 3/8

Manley custom Ti valves
#11933-R 2.055x5.195x.3415x.290 (complete) $400
#11933-R 2.055x5.195x.3415x.290 (7 of $300
#11933-R 2.080x5.195x.3415x.290 (7 of $300

Delwest Ti valves
Intake ones on ebay 2.055x5.140 (complete) $350
Exhaust ones on ebay 1.600x5.200 (complete) $350

REV valves (complete sets) asking $120 per set
#x450 1.600x5.070 (2 sets)
#x460 1.600x5.070
#x451 1.600x4.960
#x462 2.020x4.960
#x463 2.020x5.020
#x467 2.055x5.070

Crower (Pontiac) cam 60245 $90
Comp cam 3317-3318-HR114 H3833-06 for 350 Chevy (factory roller) $150

Clevite bearings - will list specifics tomorrow
Valve guide - same as above - just about everything
Seat blanks - same as above

Ferrea valves
F1277p 2.020x5.010 $150
F801940 custom 1.940x4.910 $150
F801500 custom 1.500x4.924 $150
F1093p 1.600x5.060 $250
F1271p 1.880x5.440 $250
F1207P 2.100x5.160 $150
f1810p 1.600x5.060 $150

Brand new Custom cp pistons 13.6:1 4.140" bore for a 3.320 stroke motor with 28deg head. Includes rings but does not include wrist pins unless I find them $500 w/no pins. I have the spec sheet as well.

CV retainers cvre530 8deg titanium $150
PAC 1325 dual 1.550" springs $325
PSI ct1244 dual 1.610" springs $300
Oliver 350 4-bolt main caps with 2-bolt front cap $175

He has also has a Hines crankshaft balancer

note: I will do a mass uploading to my photobucket account tomorrow. If any would like to request pictures I will make sure to post those first. I know I am not known on this forum but have vouches on k20a going back to 2005 and honda-tech going back to 2001.

[6spd_ek]

Just a couple of pics




Got set of 1.677" triple valve springs - believe to be Manley or Comp $350






250lb@2.5"
310lb@2.187"
350@2.125"

Approx 1" travel was 700lb and a popped blood vessel

[6spd_ek]

Correction I believe it was 250lb @ 2.25" (not 2.5) on the triple spring

More pics




REV valves - all tips are marked model. All sizes/measurements verified.




Manley Custom Titanium valves 2.055x5.195x11/32 w .290 tip










Hines CD-500 balancer (more pics will be in equipment FS thread). Maybe tomorrow. Also Sunnen VR-6500 valve grinder, Kwikway Ti valve grinder, Empire blast cabinet with media clean tank, DCM HB3800 CBN Surfacer


Newen, Serdi, Sunnen HS-60k, super flow, Rottler vr9 pending.

[user-z68766209]

Where is this all located at?

[6spd_ek]

Upstate NY near Albany

[6spd_ek]

Also have

BHJ Products
- O-ring grinder
- O-ring registers for Chevy bbc & sbc and ford sbc
- Torque plates for Ls2 & Ford & Honda B18

Goodson / MTI Pneumatic spring compressor $850
K-line 9000 Pneumatic spring compressor $650

K-line guide liner install kits 7mm , 6mm , 5/16

Pics can be found in my ebay listings. Additional pics/info available I request.

[PackardV8]

PM me details on the Hines and the K-Line.