Wanted one TRW piston L2489 for 400 SBC

machinedave · Post by **machinedave** » Thu Jan 15, 2015 5:15 pm

I'm looking for one TRW/Speed Pro piston L2489 .030" oversize. This is a discontinued part number. Forged, flat top 2 valve reliefs for 400 SBC. A used piston would be fine too if the skirts are good and the pin is not too loose or tight.

Adger Smith · Post by **Adger Smith** » Fri Jan 16, 2015 11:03 pm

Try this guy on E-bay... He has a bunch of old singles.
http://stores.ebay.com/johnsonsspeedwar ... 7675.l2563

machinedave · Post by **machinedave** » Sat Jan 17, 2015 4:13 pm

Thanks Adger. I will check it out.

Adger Smith · Post by **Adger Smith** » Sun Feb 15, 2015 3:47 pm

Dave,
I just tripped on this: http://www.ebay.com/itm/TRW-L2418-forge ... 73&vxp=mtr

I hope that helps
Adg

machinedave · Post by **machinedave** » Mon Feb 16, 2015 8:26 am

Thank you Adger!

user-z68766209 · Post by **user-z68766209** » Mon Feb 16, 2015 9:30 am

Might try this guy lots of NOS parts
Mills Motor.... Mike 800 624 7999

Don Terrill’s Speed-Talk

Wanted one TRW piston L2489 for 400 SBC

Wanted one TRW piston L2489 for 400 SBC

Re: Wanted one TRW piston L2489 for 400 SBC

Re: Wanted one TRW piston L2489 for 400 SBC

Re: Wanted one TRW piston L2489 for 400 SBC

Re: Wanted one TRW piston L2489 for 400 SBC

Re: Wanted one TRW piston L2489 for 400 SBC