WTB...GM 8.5" gears
Moderator: Team
WTB...GM 8.5" gears
Looking for some sets of GM 8.5" gears... 3.42, 3.73 ratios could use the carriers too.. let me know what you have thanks Josh
Josh K.
-
- Guru
- Posts: 1602
- Joined: Sat Dec 24, 2011 10:02 am
- Location: melfort saskatchewan Canada
Re: WTB...GM 8.5" gears
i have a set of 3.42 gears for a gm 8.5" 10 bolt. They are stock GM gears. I also have the stock open truck carrier. $100 for it all plus shipping. Where are you?
The Word of God is quick and powerfull
www.therocketshop.blogspot.com
www.therocketshop.blogspot.com
Re: WTB...GM 8.5" gears
PA 15905...Have a business address available but I'm sure shipping will still be pretty pricey...we will seeprairiehotrodder wrote:i have a set of 3.42 gears for a gm 8.5" 10 bolt. They are stock GM gears. I also have the stock open truck carrier. $100 for it all plus shipping. Where are you?
Josh K.
-
- Guru
- Posts: 8706
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: WTB...GM 8.5" gears
Why not just buy a new set of gears.
They are available from many suppliers and decent quality as well
I have used Yukon Gear many times and in 15years never had a failure with them.
They cost about $195.00 for a new ring and pinion and about $100.00 for the bearing and installation kit.
They can be had for different carriers as well so you can swap a 4.10 gear onto a 3.08 carrier without needing to get a different carrier.
Also Randy's Ring and Pinion in Washington state has the best deal going on gear sets for just about everything made.
I get from them quite often and never have any issues with getting good quality and service life
They are available from many suppliers and decent quality as well
I have used Yukon Gear many times and in 15years never had a failure with them.
They cost about $195.00 for a new ring and pinion and about $100.00 for the bearing and installation kit.
They can be had for different carriers as well so you can swap a 4.10 gear onto a 3.08 carrier without needing to get a different carrier.
Also Randy's Ring and Pinion in Washington state has the best deal going on gear sets for just about everything made.
I get from them quite often and never have any issues with getting good quality and service life
Real Race Cars Don't Have Doors
Re: WTB...GM 8.5" gears
Low buck circle track deal...looking to set up for different tracks.
Josh K.
-
- Guru
- Posts: 8706
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: WTB...GM 8.5" gears
What about wrecking yards near you??
What are they asking for gear sets and carriers for them rear ends.
What are they asking for gear sets and carriers for them rear ends.
Real Race Cars Don't Have Doors
Re: WTB...GM 8.5" gears
They all want to sell you a complete rear for 300 or so...plus I figured if someone here had stuff laying around it would put some money in there hand and save some money from buying new...not my stuff it's for a neighbor friend that runs pure stock...I did run the car twice this year though once finishing 4th in a "run what ya brung" against full blown street stocks with no changes to the car but adding a sprint car wing, that was fun. ..
Josh K.