BBC solid rollers

prairiehotrodder · Post by **prairiehotrodder** » Tue Oct 21, 2014 5:12 pm

comp custom grind 260 / 270 @ .050 .670 / .670 lift 110 LSA

Chris Straub custom grind 247 / 254 @ .620 / .640 lift 107 LSA

Both cams have gen 5 snout for use with a thrust plate. $260 shipped to USA or Canada. Located in Canada

email brianj_taylor@hotmail.com or phone 306-752-5558

prairiehotrodder · Post by **prairiehotrodder** » Fri Nov 28, 2014 5:19 pm

Both cams still available $250 shipped to USA. The comp cam is billet and the CS cam appears to be cast.

prairiehotrodder · Post by **prairiehotrodder** » Fri Jan 30, 2015 3:45 pm

Specs on Chris Straub cam are as follows:

279 / 290 or 248/260 @ .050
lift .638 intake, .619 exh with 1.7 ratio rockers
107 LSA

Sorry for the confusion. This cam was chosen based on a pump gas 489 with AFR 325 heads. I have all the opening and closing numbers as well. I never realised the full potential of this cam and i would be very curious to see it work in someone else's engine and what they gain.

prairiehotrodder · Post by **prairiehotrodder** » Wed Feb 04, 2015 12:08 pm

Lowering price. $230 US dollars shipped to USA for either cam. I want to buy a new cam for a much different motor but i need to sell these first. Pay by paypal or mail me a cheque or money order.
Brian

mike1965 · Post by **mike1965** » Fri Feb 06, 2015 9:48 pm

Are these for a big block chevy

prairiehotrodder · Post by **prairiehotrodder** » Sat Feb 07, 2015 8:22 pm

bbc yes

n2oracer · Post by **n2oracer** » Mon Feb 16, 2015 2:26 pm

Still available?

prairiehotrodder · Post by **prairiehotrodder** » Mon Feb 16, 2015 11:36 pm

yes both cams are still available

n2oracer · Post by **n2oracer** » Tue Feb 17, 2015 7:16 am

Can you post the part # or lobe numbers for the Comp cam? Sending you a PM. Thanks.

prairiehotrodder · Post by **prairiehotrodder** » Wed Feb 18, 2015 9:51 am

i have the cam card if you give me your email i can send it to you.

prairiehotrodder · Post by **prairiehotrodder** » Thu Feb 26, 2015 12:43 pm

Comp cam sold locally. Straub Cam still available.

n2oracer · Post by **n2oracer** » Thu Feb 26, 2015 11:46 pm

Interested in the CS cam.
What is the rpm range and lash?
Do you have a can card or paperwork for the cam?

prairiehotrodder · Post by **prairiehotrodder** » Fri Feb 27, 2015 11:17 am

yes i have everything, whats your email adress?

prairiehotrodder · Post by **prairiehotrodder** » Fri Feb 27, 2015 12:40 pm

Intake Duration - ID 279 (248 at .050)

Exhaust Duration - ED 290 (260 at .050)

Lobe Center Angle - LCA (also known as LSA) 107

Intake Centerline - ICL 101

Intake Valve opens - IVO 38.5

Intake Valve closes - IVC 60.5

Exhaust Valve Opens - EVO 78

Exhaust Valve Closes - EVC 32

Exhaust Centerline - ECL 113

Overlap 70.5

Lobe Lift intake .375

Lobe lift exhaust .364

monte442 · Post by **monte442** » Sat Mar 07, 2015 10:13 pm

Is the Straub cam still available ?

Don Terrill’s Speed-Talk

BBC solid rollers

BBC solid rollers

Re: BBC solid rollers

Re: BBC solid rollers

Re: BBC solid rollers

Re: BBC solid rollers

Re: BBC solid rollers

Re: BBC solid rollers

Re: BBC solid rollers

Re: BBC solid rollers

Re: BBC solid rollers

Re: BBC solid rollers

Re: BBC solid rollers

Re: BBC solid rollers

Re: BBC solid rollers

Re: BBC solid rollers