361ci RHS RAISED RUNNER STEELHEAD ENGINE

[perfconn]

Bowtie 1184 block 4.157 bore
Winberg 3.330 stroke crankshaft
Racetec 4cc dome pistons
DLC coated wristpins
Carrillo 6 inch honda journal 540 gram rods
RHS raised runner cnc ported steelheads
Edelbrock cnc ported intake
2.125-1.600 titanium valves
Comp Cam billet roller camshaft
Crower. 875 roller lifters
PSI roller springs & titanium retainers
Jessel 1.70-1.70 shaft rockers
CV 3/8 pushrods
Aluminum valve covers
Peterson popoff valve
MSD crank trigger
MSD distributor
Moroso plug wires
ATI 6.375 balancer
Stewart waterpump
25% reduction pulleys
Champ aluminum drysump oilpan w/3#12
Stealth 1.400 gas carburetor
Aluminum carburetor spacer

Fresh off the dyno-$14,500.00
Phone: 865-567-6943
Email: terry.marciaburnett@gmail.com
Pictures & dyno sheets are available

[perfconn]

$13,500.00 if you don't need the carburetor. Excellent steelhead engine.Weighs 489#.Built by Phantom Race Engines.Dynoed at 538.4 torque @ 5200 and 670.7hp @ 7200

[perfconn]

The heads are RHS 23* castiron heads that have been angle milled to 20.5* and flow 336cfm @ .700