manifold was a one piece edelbrock 2950. I converted it to a spider by cutting the valley/coolant passages off. it was originally ported by Wilson manifolds as shown, for the nascar busch north series. after running it, I sent it off to Reher Morrison to have Darin Morgan open up the plenum and mate it up to a 2.00" 4150/4500 taper spacer. im keeping the taper spacer, but have another unported one that I will include.
I was running it on a 427 s.b.c..... the motor with this manifold and taper spacer with a 1050 prosystem dominator made 775 corrected h.p. @ 7200 rpm.
I can supply templates to help determine the match to your heads. I have additional pictures I can email... asking $250 price does not include shipping
call or text Jerome
309-883-3578
email jbaker@kresscarrier.com
wilson/edelbrock 18 degree spider
Moderator: Team
-
- Member
- Posts: 86
- Joined: Tue Dec 25, 2007 11:21 am
- Location: land of lincoln
wilson/edelbrock 18 degree spider
You do not have the required permissions to view the files attached to this post.
thanks lynn,
-
- Member
- Posts: 86
- Joined: Tue Dec 25, 2007 11:21 am
- Location: land of lincoln