Aluminum BBC connecting rods

[user-3597028]

Two sets;

R&R pro billet with upgraded material. 6.385” perfect condition. Were in a 700hp, 6800 rpm bracket engine. 96 runs, probably half were 1/8 mile. I changed them on freshen because the customer switched to E-85 fuel, steel rod street set up. $475.00

GRP 500 series billet. 6.535", perfect condition. Came out of my bracket engine. 68 runs. Changed to steel rod and nitrous piston. Still have the STD HP bearings in them and they are perfect too. I'd re-use them without a second thought. $475.00


Both sets are perfect, stores in a heated shop, un-torqued. Neither set have seen rpm over 7500 or any nitrous. I would not sell them if they were not perfect. If you are not 100% satisfied, I will take them back.

Thanks, Ron, Cedar Machine Service. 651 674-8365