This block has been line honed to 2.641
Cam tunnel is machined for a 50MM roller bearings.
Center feed oil holes opened up.
Decked to 9.000
Lifter bores have been honed to .9053 for Morel lifter
Cylinders are at 4.120 and need to be finished to size and will finish to customers spec.
Block is set up for dry sump.
Morel solid .904 roller lifters on center add 750.00
Priced is 2395.00 plus 125.00 for shipping any where in the US
Dart SHP Pro block 31161212
Moderator: Team
-
- Guru
- Posts: 4653
- Joined: Thu Jul 01, 2004 6:34 am
- Location: NORTHEAST
- Contact:
Dart SHP Pro block 31161212
Website is up and running
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
-
- Guru
- Posts: 4653
- Joined: Thu Jul 01, 2004 6:34 am
- Location: NORTHEAST
- Contact:
Re: Dart SHP Pro block 31161212
Thanks for looking but its gone.
Website is up and running
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole
http://hinksonautomotive-cncblocks.com/
Machine shop tour
http://hinksonautomotive-cncblocks.com/shop-tour/
Monthly Specials
http://hinksonautomotive-cncblocks.com/specials/
55MM babbit cam bearings with 1 hole