Rotating assemble 6 blueprinted Carrillo 6.300 long
rods with 2.00 big end .905 wide and .927 small end
Freshly resized,billet even fire crank machined for
Rods fresh,set of new 6 Wisco 4.059 pistons with oil ring
spacers.can send pictures if you have interest.price to
sell 2200.00 are willing to trade for a good racing Alky carb
and cash contact altwill3@verizon parts located in
Southern California
Ford Svo even fire v-6
Moderator: Team
Re: Ford Svo even fire v-6
Just a few pictures
You do not have the required permissions to view the files attached to this post.
Re: Ford Svo even fire v-6
Would you know where a block could be found that would still be useable with this rotating assembly???
Re: Ford Svo even fire v-6
The blocks are hard to find,I did have the number of a guy In Ohio that had a new block some years ago but can"nt find his number and they come up on eBay sometimes and racing junk.You just have to keep your eyes and ears open.Oh also my engine is foresale I complete Busch grand national ford V-6 270 CID rebuilt for DR racing I have been using it in a drag car when I bought it it was on its second rebuild per the paper work it made 450 hp in Busch trim with a 380 carb. I dynoed it with a 850 holley and it made 510 hp if you are interested in that plus the rotating assembly with can talk a deal.
-
- Guru
- Posts: 1029
- Joined: Mon Sep 10, 2012 1:55 pm
- Location: Anaheim, CA
Re: Ford Svo even fire v-6
They did not have a distributor for a Svo V-6 you have to use a ford 302 distributor and buy a even or odd fire reluctor and factory cap and rotor or a msd 302 distributor and the msd cap is from the Buick V-6.PPPC can make the reluctor.
-
- Guru
- Posts: 1029
- Joined: Mon Sep 10, 2012 1:55 pm
- Location: Anaheim, CA
Re: Ford Svo even fire v-6
I was aware of that and have "converted" a few back to 302 operation. FMS units are getting harder to find every day. Thanks .
Re: Ford Svo even fire v-6
1972ho what all v6 parts you have?Any details on the complete engine? I run odd fire stuff but am always kinda looking.Thanks joe