RHS Heads wanted
Moderator: Team
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
RHS Heads wanted
Looking for BARE RHS 12402 torquer type heads With 67cc chambers
I am looking for new unused heads that someone may still have on the shelf
PM me the details
Dave
I am looking for new unused heads that someone may still have on the shelf
PM me the details
Dave
Real Race Cars Don't Have Doors
Re: RHS Heads wanted
Thought you already had them all...??
Arw the dart SS any good? We can run them now.. (wish I new that last seaon...)
Arw the dart SS any good? We can run them now.. (wish I new that last seaon...)
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: RHS Heads wanted
Yes I had what was left but they have been flying out the door as fast as I could build them.
I need a pair of 67cc heads for a spec engine. I could use the World head but prefer not to.
I need a pair of 67cc heads for a spec engine. I could use the World head but prefer not to.
Real Race Cars Don't Have Doors
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: RHS Heads wanted
Still lookin if anyone has a pair or single head/s they are not using.
Real Race Cars Don't Have Doors
-
- Show Guest
- Posts: 6199
- Joined: Thu Aug 24, 2006 8:16 pm
- Location: santa ana calif-92703
- Contact:
Re: RHS Heads wanted
I have two heads that might be what you are looking for. I will check them out ASAP, and get back to you..
JOE SHERMAN RACING
JOE SHERMAN RACING
Re: RHS Heads wanted
Which are better, RHS or Dart? ( 165-176 runner, 1.94/1.5 valve stock replacements)
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: RHS Heads wanted
rick7343 wrote:Which are better, RHS or Dart? ( 165-176 runner, 1.94/1.5 valve stock replacements)
The RHS head flows better then the dart as cast by a good margin.
They are just exstinct not. I talked to EQ and they are going to produce the heads in the new year so they say. They did not give a date. They also did not indicate if the casting quality would be the same as the RHS was.
The Dart S/R head is almost as good but with a decent valve job they are within 1% of the RHS head.
They are better at one point but not as good as another .
After .500 they drop off much more then the RHS as cast
Real Race Cars Don't Have Doors
-
- HotPass
- Posts: 1077
- Joined: Sat Oct 22, 2011 1:28 am
- Location: In Stephenville, Texas, USA from Thunder Bay, Canada
Re: RHS Heads wanted
I ran a set of 180 iron rhs heads on my 383 74cc light porting as they were cast great as is.. Good stinking heads for the money,ProPower engines wrote:rick7343 wrote:Which are better, RHS or Dart? ( 165-176 runner, 1.94/1.5 valve stock replacements)
The RHS head flows better then the dart as cast by a good margin.
They are just exstinct not. I talked to EQ and they are going to produce the heads in the new year so they say. They did not give a date. They also did not indicate if the casting quality would be the same as the RHS was.
The Dart S/R head is almost as good but with a decent valve job they are within 1% of the RHS head.
They are better at one point but not as good as another .
After .500 they drop off much more then the RHS as cast
Just a little bit of hell with rockers and geometry, but I would do it again ! Looking for a set for a tow and go 400 sbc
As I'm approaching 40,I still think I'm 20. What the hell is wrong with me?
-
- HotPass
- Posts: 216
- Joined: Sat Aug 30, 2008 8:12 pm
- Location: Illinois
Re: RHS Heads wanted
Not 12402 but I have a set of 12410 with 2.02 1.60 valves. This is the fully assembled head.
-
- Guru
- Posts: 8707
- Joined: Sun Jan 21, 2007 1:16 pm
- Location: Victoria BC Canada
Re: RHS Heads wanted
Still looking if anyone has some in the corner collecting dust
Real Race Cars Don't Have Doors