Edelbrock 2925 intake plumbed with pro race fogger. Intake port matched to 1206 Felpro gasket
AFR 235cc cylinder heads..64cc chamber.
Comp cams pro magnum 1.7 intake, 1.6 exhaust rocker arms..comes with stud girdle.
Comp cams Roller lifters
Comp 3/8 pushrods
MSD distributor with the BIG cap
Everything is used and in good shape.
2500.00 for topend with everything listed above.
5500.00 for shortblock and everything listed below.
Dart Little M Block
Eagle 4340 Forged Crank 3.875"
Eagle 4340 Forged 6" HBeam Rods
NEW Diamond 13.5 to 1 Gas ported pistons..23* heads
All bearings are coated..
NEW Total Seal AP Stainless Top rings
New upgraded wrist pins for NOS
Bullet Custom Solid Roller camshaft
Billet steel Timing chain
MSD Cranktrigger
Balancer
Sfi Steel flexplate
All machine work has been done by BBTRACING. Has not been assembled since being picked up from machine shop. Still wrapped in plastic.
contact me for more info and pics..901-314-8117
423 SBC Shortblock and TopEnd
Moderator: Team
-
- New Member
- Posts: 1
- Joined: Wed May 15, 2013 11:01 pm
- Location: