SBF parts

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
Feron perf
New Member
New Member
Posts: 18
Joined: Mon Oct 08, 2007 10:01 pm

SBF parts

Post by Feron perf » Fri Feb 04, 2011 1:27 am

Used Eagle 5.090 H-beams, big ends checked, and small end pin fit, used Srp flat top .030 pistons, pin bores dusted out, skirts in great shape, wrist pins good, new spiro locks. New cleavite .010/.010 rod and main h bearings, new ARP oil pump drive shaft, and used comp cams 7754 6.400 length .080 wall pushrods. Parts are in great shape, used very little before switching to different combo. 450.00 for all or make an offer on individual parts, P.M. me if interested.

Feron perf
New Member
New Member
Posts: 18
Joined: Mon Oct 08, 2007 10:01 pm

Re: SBF parts

Post by Feron perf » Sat Feb 05, 2011 9:34 pm

Willing to go to 300.00, just to get it out of my hair.

JohnsnsFord2@aol.com
Member
Member
Posts: 118
Joined: Mon Jun 27, 2005 10:22 pm

Re: SBF parts

Post by JohnsnsFord2@aol.com » Sun Feb 06, 2011 3:28 pm

where areyou located??
Stephen Johnson #2162
Horace Johnson #2167
SS/D 427 Ford Fairlane NHRA-IHRA
Ex-Jim Van Cleve
1985 Mustang GT N/A 331

Post Reply