347sbf, Canfield, Scat, Probe, Comp, Jomar, Edelbrock
Posted: Mon Jan 24, 2011 2:18 am
So here's the deal. Some of you guys might be familiar with my new cylinder head acquisition. As it turns out, this setup has some additional quirks that weren't disclosed at the onset (innocently I might add, he simply didn't know). I gave my word to buy them however, so it is what it is. These quirks however, literally REMOVE the option of putting the heads on a stock block. Not a problem really, I have a nice A4 that will be a good candidate for the required accommodation. However, this forces my intended schedule up a year or so...and I have to build the A4 now.
As I don't have money coming out my ears...that means some stuff is going up for sale.
First. I have a brand new set of Canfield 195's, new in the box. They are complete with 2.08" Ferrea 1000 valves, studs, guideplates, and upgraded solid roller springs (see the picture for details. I believe the chambers are 57cc. The base heads with a 2.02"/1.60" valve go 281/209cfm. Remember, these have the 2.08" intake upgrade. $1700 shipped in the lower 48. They were over $1900 plus shipping new, and you can't get them anymore.
Second. Brand new 7/16" stud, 1.6:1 Comp Ultra Gold rockers. THESE HAVE NEVER BEEN RUN. I don't have the box because I had to use it to send my old set back to Comp. $225 plus shipping. $200 if purchased with the heads.
Third. Jomar Canfield/Highport rocker stud girdle, with extended locks. $125 plus shipping, $100 if purchased with the heads.
Fourth. 8.2 deck Edelbrock Victor Jr intake. Unmolested, and I already had the mounting holes angled to adapt to heavily angle milled heads. $250 shipped.
Fifth. 347 shortblock. .030" over, zero deck, Scat 9000 crank, Scat 4340 capscrew i-beam rods, total seal rings, probe flat top pistons (inline). Make offer, will likely be able to ship around the middle of next month.
Pm here, email to crisanderson27@gmail.com, or call/text at 775.445.0215. Thanks for taking the time to look!
Be sure to check the pictures of the heads below.
Cris
As I don't have money coming out my ears...that means some stuff is going up for sale.
First. I have a brand new set of Canfield 195's, new in the box. They are complete with 2.08" Ferrea 1000 valves, studs, guideplates, and upgraded solid roller springs (see the picture for details. I believe the chambers are 57cc. The base heads with a 2.02"/1.60" valve go 281/209cfm. Remember, these have the 2.08" intake upgrade. $1700 shipped in the lower 48. They were over $1900 plus shipping new, and you can't get them anymore.
Second. Brand new 7/16" stud, 1.6:1 Comp Ultra Gold rockers. THESE HAVE NEVER BEEN RUN. I don't have the box because I had to use it to send my old set back to Comp. $225 plus shipping. $200 if purchased with the heads.
Third. Jomar Canfield/Highport rocker stud girdle, with extended locks. $125 plus shipping, $100 if purchased with the heads.
Fourth. 8.2 deck Edelbrock Victor Jr intake. Unmolested, and I already had the mounting holes angled to adapt to heavily angle milled heads. $250 shipped.
Fifth. 347 shortblock. .030" over, zero deck, Scat 9000 crank, Scat 4340 capscrew i-beam rods, total seal rings, probe flat top pistons (inline). Make offer, will likely be able to ship around the middle of next month.
Pm here, email to crisanderson27@gmail.com, or call/text at 775.445.0215. Thanks for taking the time to look!
Be sure to check the pictures of the heads below.
Cris