SB FORD PARTS

NOT ALLOWED: Selling or reselling in a retail manner.

Moderator: Team

Post Reply
378sbf
New Member
New Member
Posts: 4
Joined: Thu Sep 09, 2010 5:24 pm

SB FORD PARTS

Post by 378sbf » Thu Sep 09, 2010 5:50 pm

USED SB FORD CROWER HIPO SOILD ROLLER LIFTERSPART #66215H,THESE LIFTERS HAVE LESS THEN 1000 MILES.AND ARE ABOUT $700 NEW,SELLING $325 SHIPPED

USED SB FORD CRANE ULTRA PRO SOLID ROLLER LIFTERS PART # 44571-16 . THEY HAVE OFFSET INTAKE PUSH RODS CUP. LIFTERS ARE IN GOOD CONDITION . NEW FROM SUMMIT THEY ARE ABOUT $750 .SELLING $350 SHIPPED

NEW SBF FORD PROBE SHAFT ROCKERS THEY FIT BOTH CANFIELD AND TRICKLFOW HIGH PORT HEADS. THESE ROCKERS WERE ABOUT $900 FROM PROBE.SELLING $725 SHIPPED

USED SB FORD 302 TRW DOMED FORGED PISTONS. PART #L2249 THEY ARE .030 AND THEY COME WITH PINS $250 SHIPPED

NEW BARE CASTINGS SB FORD TRICK FLOW HIGH PORT IRON HEADS .,187CC INTAKE RUNNERS .64CC CHAMBERS.RAISED EXHAUST PORTS,THESE HEADS ARE STOCK NEVER BEEN PORTED,YOU CAN INSTALL VALVES UP TO 2.125/1.650. THESE HEADS FLOW 265/170 BOX STOCK .THESE ARE THE BEST IRON SB FORD HEAD OUT. GREAT FOR CLASS THAT NEED IRON HEADS $750 SHIPPED

NEW SB FORD CRANE SHAFT MOUNT ROLLER ROCKERS PART # 44809-1 .ROCKERS FIT VICTOR HEADS, THESE ROCKERS ARE ABOUT $750 SELLING $590 SHIPPED

BirdMan
Expert
Expert
Posts: 588
Joined: Mon Jan 19, 2009 11:19 am
Location: Topeka, KS

Re: SB FORD PARTS

Post by BirdMan » Thu Sep 09, 2010 9:11 pm

I am interested in Crane shaft rockers, what letters are on them? Where are you located? Any pictures? Thanks, Dale C
Dale C.

378sbf
New Member
New Member
Posts: 4
Joined: Thu Sep 09, 2010 5:24 pm

Re: SB FORD PARTS

Post by 378sbf » Sat Sep 11, 2010 7:01 am

sent email

378sbf
New Member
New Member
Posts: 4
Joined: Thu Sep 09, 2010 5:24 pm

Re: SB FORD PARTS

Post by 378sbf » Wed Sep 22, 2010 7:24 am

ALL PARTS ARE NEW AS LISTED BEEN SITTING IN THE SHOP FOR A WHILE.

NEW PRIMEONE 28OZ SFI BALANCER.PART# 850-351-4-SFI $150 SHIPPED

NEW ELGIN PRO STOCK 351W HV OIL PUMP AND PROBE HARDEN SHAFT .PART# EM-83HV AND #11841 FOR SHAFT .NEW THEY WERE $100, SELLING $75 SHIPPED

NEW FORD MOTORSPORT TIMING CHAIN PART#6268-A302 $75 NEW. SELLING $50 SHIPPED

NEW SCAT 28OZ SFI FLEXPLATE. $30 SHIPPED

NEW COAST HIGH PERFORMANCE 79-93 351W OIL PAN.PU AND DIP STICK $250 SHIPPED

NEW KOOKS WIDE BOLT HEADER GASKETS $30 SHIPPED EACH

NEW STAINLESS STEEL 1.60 EX VALVES 4.911 OL $50 SHIPPED

NEW STAINLESS STEEL 1.60 EX VALVES +100 LONGER $50 SHIPPED

NEW CRANE/COBRA 1.7 ROCKERS. FEW OF THE TIPS HAVE SOME SURFACE RUST FROM SITTING. A LITTLE CLEAN UP. GOOD TO GO $ 185 SHIPPED

USED DSS 302 MAIN SUPPORT AND TRAY. NO STUDS.$ 175 SHIPPED

NEW WISECO SB FORD 351W FORGED REVERSE DOMED. THESE ARE 4.125 BORE PISTONS COME WITH PISTONS, PINS AND RINGS. SPECS ARE 24CC REVERSE DOME,1.300 COMP HEIGHT,4.00" STROKE AND 6.200 RODS. $550 SHIPPED

USED SB TIMING COVER $40 SHIPPED

C4 SMALL BELL HOUSING TRANS. GOOD CORE $150

USED FORD RACING N351. THESE HEADS ARE ABOUT $800 BARE. SELLING $1000 SHIPPED

NEW TRW 351C STD BORE FORGED PISTONS $190 SHIPPED

cobraphx
New Member
New Member
Posts: 1
Joined: Sun Jan 30, 2011 8:09 pm

Re: SB FORD PARTS

Post by cobraphx » Sun Jan 30, 2011 8:13 pm

Any chance you still have the Probe rockers for the Canfield heads?

Post Reply