Hi,
I am trying to upgrade the computer on my Superflow SF-901. How do I transfer the DOS software that is currently in my old computer to the new one? Is there a download available anywhere? I have tried searching but have had no luck. Also, if anybody else has done this before please let me know if there are any tips that may help me. Thanks!
Superflow SF-901 DOS Software
Moderator: Team
-
- Pro
- Posts: 415
- Joined: Wed Feb 16, 2005 10:37 pm
- Location:
Re: Superflow SF-901 DOS Software
As far as I know, you can't run a DOS program on a newer computer without having a DOS Emulator program installed.
I have several DOS programs that I run on my laptop with Windows 10 installed. I use a DOS emulator called DOS Box. It is available free online.
I have several DOS programs that I run on my laptop with Windows 10 installed. I use a DOS emulator called DOS Box. It is available free online.
Project Greenlight
-
- Expert
- Posts: 976
- Joined: Sat Oct 27, 2007 4:53 am
- Location: Yorkville, Illinois (60 miles SW of Chicago)
Re: Superflow SF-901 DOS Software
http://www.pcworld.com/article/243718/r ... ows_7.html
You might find a 7 update easier with more capabilities.
You might find a 7 update easier with more capabilities.
Re: Superflow SF-901 DOS Software
If anybody has more information on this or you find it out it works I would also like to do the same, I don't have a disc just the software that is already in my pc, and I am worried when it t crashes I will be in a bind.
Thanks
Thanks
-
- HotPass
- Posts: 9404
- Joined: Tue Nov 22, 2005 5:41 am
- Location:
Re: Superflow SF-901 DOS Software
http://www.computerhope.com/issues/ch000022.htm
MS-DOS and the Windows command line
xcopy command
Using the xcopy command you can copy the complete contents of a drive to another drive. An example of a command that can be used is shown below.
xcopy c:\ d:\ /h/i/c/k/e/r/y
In the above example the xcopy command would copy all of the files on the C:\ drive to the D:\ drive.
https://www.semasan.com/breaking-news-archives?utm_campaign=DrivingForce_DF272&utm_content=SeeAllLeg
Re: Superflow SF-901 DOS Software
Thanks for the reply
I will give that a go and see if I can make it work
Thanks again
I will give that a go and see if I can make it work
Thanks again