Iskenderian Mile A More Camshaft ID help

Tech questions that don't fit above forums

Moderator: Team

Post Reply
Agave
New Member
New Member
Posts: 1
Joined: Sat May 16, 2015 3:01 pm
Location:

Iskenderian Mile A More Camshaft ID help

Post by Agave »

Iskenderian Mile A More Camshaft ID help

I've got this camshaft with these ID #'s :

Y75V
3380S0
5P
201_96M

Can anyone help with a cam card or specs for this?

Thanx
pdq67
Guru
Guru
Posts: 9841
Joined: Thu Mar 04, 2010 8:05 pm
Location:

Re: Iskenderian Mile A More Camshaft ID help

Post by pdq67 »

This is an old thread, but I don't think Isky gave out spec's for them. Probably have to mock it up and install a degree wheel to find out.

pdq67
Geoff2
Guru
Guru
Posts: 1976
Joined: Mon Nov 09, 2015 4:36 pm
Location: Australia

Re: Iskenderian Mile A More Camshaft ID help

Post by Geoff2 »

Mile -or -Mor cam

I could not find that particular part # in my old Isky catalog, but all the MOM cams listed had 248° adv duration & 0.400" valve lift with 1.5 rockers. LSA was not given.
pdq67
Guru
Guru
Posts: 9841
Joined: Thu Mar 04, 2010 8:05 pm
Location:

Re: Iskenderian Mile A More Camshaft ID help

Post by pdq67 »

Here is one for an AMC engine but I figure they all are pretty-much the same.

Part Type:Camshafts

Product Line:Isky Hydraulic Flat Tappet Camshafts

Summit Racing Part Number:ISK-1331-M

Isky Grind Number: Mile-A-More

Camshaft Manufacturers Description: For use with lower compression ratio engines.
Basic Operating RPM Range:1,000-3,800
Cam Style: Hydraulic flat tappet
Valve Springs Required: Yes

Advertised Intake and Exhaust Duration: 248
Intake and Exhaust Duration at 050 inch Lift:194
Lobe Separation (degrees):108
Intake Valve Lift and Exhaust Valve Lift with Factory Rocker Arm Ratio:0.425 in.

Computer-Controlled Compatible: No

If I remember right it was on 108/104 or something like this???

And they made two different versions, this one and one a schosh bigger for the bigger engines???

Hope this helps? I haven't heard of these cams in years and years!!

pdq67
Post Reply