Cam dynamics

Tech questions that don't fit above forums

Moderator: Team

New Member
New Member
Posts: 1
Joined: Wed Mar 08, 2017 2:53 pm

Cam dynamics

Postby vega1 » Thu Mar 09, 2017 9:06 am

I have 2 cams from cam dynamics, I am trying to identify the specs on them such as lift and other info., the numbers I have on the cams is 95F2A and 94D2A if someone can help I would appreciate it. Thank you vega1

New Member
New Member
Posts: 34
Joined: Fri Feb 09, 2007 11:21 am
Location: Pitch Forks, ND

Re: Cam dynamics

Postby Chipster » Thu Mar 09, 2017 10:16 pm

Call Steve Huggins, Huggins Cams, Olive Branch MS 662-895-8482 he ran the shop at Cam Dynamics

Posts: 378
Joined: Wed Feb 16, 2005 10:37 pm

Re: Cam dynamics

Postby Greenlight » Fri May 05, 2017 11:11 pm

I don't think those are camshaft part numbers/grind numbers.

I think those numbers identify the core and are probably "stamped" into the cam. The part number/grind number(s) are usually etched in, using an engraving type device.

Are there ANY other numbers, letters, etc.?
Project Greenlight

Return to “Other Tech”

Who is online

Users browsing this forum: No registered users and 3 guests