Starting line tech

Open to topics unrelated to Speed-Talk.
No politics. No religion topics.

Moderator: Team

Post Reply
RAS
Pro
Pro
Posts: 304
Joined: Mon Jun 04, 2012 9:46 am
Location: Edmund Ok.

Starting line tech

Post by RAS »

Been doing some math after reviewing this years run records. I run a stock 305hp@6500 rpm 2012 V6 Mustang with 3.55 gears and BMR lower trailing arms. Otherwise it's stock. No mods. My 60' on stock tires is 2.059 with RTs in the .050 range common. I'm leaving about 3000 rpm to avoid spin. My engine makes max torque at 4300. So, I know I'm leaving a lot at the line. I definitely need a drag radial to get that 4300-4500 leave without spin. Going to add an Aluminum driveshaft also. Currently shifting manual trans at 6800-6900. The car MPHs at 102 and there really isn't anything left there. Any ideas on what might help the ET. Thanks, Richard
Post Reply