8" Torque Converter actual size

Transmission to Rear-end

Moderator: Team

Post Reply
dniccoli
New Member
New Member
Posts: 1
Joined: Sun Sep 21, 2014 10:17 am

8" Torque Converter actual size

Post by dniccoli » Sun Nov 25, 2018 11:37 am

Hey guy's, just received a brand new 8" converter from PTC to replace an old 10". I was expecting to open the box and find a smaller converter but this new 8" is exactly 10" across! It has PTC 8 stamped on it but dimensions are the same as my 10" and probably weighs the same, does that sound right or am I missing something? I tried emailing PTC with the size question but have not received a response as of yet, plan to call as soon as I can. Thanks for any insight you all can share.

Coloradoracer
Pro
Pro
Posts: 497
Joined: Sun Mar 21, 2010 9:48 pm
Location: Conifer, Colorado
Contact:

Re: 8" Torque Converter actual size

Post by Coloradoracer » Sun Dec 02, 2018 9:41 am

Converter size isn't determined by the outside but by the turbine size. Not uncommon to see a converter listed as one size but measures another...it's inside that counts, and if it was properly configured to your combo.
Mark Goulette
Owner/Driver of the Livin' The Dream rear engine dragster
Speed kills but it's better than going slow!
http://www.livinthedreamracing.com
Authorized Amsoil Retailer

User avatar
BOOT
Guru
Guru
Posts: 1525
Joined: Fri Apr 09, 2010 6:23 pm
Location: Michigan

Re: 8" Torque Converter actual size

Post by BOOT » Fri Dec 07, 2018 2:05 pm

Even if it weight the same or more, it's possible the weight is now more central and it has less inertia. Also is there a balloon plate in either?
I know as much as I can learn and try to keep an open mind to anything!

If I didn't overthink stuff I wouldn't be on speedtalk!

Post Reply