dana rear

Transmission to Rear-end

Moderator: Team

Posts: 85
Joined: Sun Feb 25, 2007 2:26 pm

dana rear

Postby redgoldstein » Sun Mar 05, 2017 8:46 pm

moser or strange dana witch is the better of the two taking out a 8/34 mopar stk elm car thanks

Ron E
Posts: 1999
Joined: Wed Aug 03, 2005 8:35 pm
Location: nc

Re: dana rear

Postby Ron E » Thu Mar 09, 2017 4:33 pm

I don't think you'll see any difference. Comes down to better deal..That, and seeing you're running a stocker, if one has lighter moving parts than the other.

Jeff Lee
Posts: 227
Joined: Sun Jun 26, 2011 12:20 am
Location: Anthem / Phoenix Arizona

Re: dana rear

Postby Jeff Lee » Wed Apr 26, 2017 6:24 pm

Make sure you get the CM axle tubes. I’ve had my MW Dana 60 in my AMX since I built it in 1998. Used in both Stock & Super Stock, always a 4-speed, and some years with brutal clutches (meaning WAY TOO MUCH!) and never changed a gear set that didn’t look as good as when I put it in. I have MW light-weight steel spool and billet main cap, MW 40-spline Gun-drilled axles. All circa 1998. Calvert makes CM perches for $100 a pair.
1970 AMX
390 4-speed
Advanced Clutches
Red Line Racing Cams

Return to “Driveline”

Who is online

Users browsing this forum: No registered users and 2 guests