dana rear

Transmission to Rear-end

Moderator: Team

Post Reply
redgoldstein
Member
Member
Posts: 93
Joined: Sun Feb 25, 2007 2:26 pm

dana rear

Post by redgoldstein » Sun Mar 05, 2017 8:46 pm

moser or strange dana witch is the better of the two taking out a 8/34 mopar stk elm car thanks

Ron E
Guru
Guru
Posts: 1951
Joined: Wed Aug 03, 2005 9:35 pm
Location: nc

Re: dana rear

Post by Ron E » Thu Mar 09, 2017 4:33 pm

I don't think you'll see any difference. Comes down to better deal..That, and seeing you're running a stocker, if one has lighter moving parts than the other.

Jeff Lee
Pro
Pro
Posts: 252
Joined: Sun Jun 26, 2011 1:20 am
Location: Anthem / Phoenix Arizona

Re: dana rear

Post by Jeff Lee » Wed Apr 26, 2017 7:24 pm

Make sure you get the CM axle tubes. I’ve had my MW Dana 60 in my AMX since I built it in 1998. Used in both Stock & Super Stock, always a 4-speed, and some years with brutal clutches (meaning WAY TOO MUCH!) and never changed a gear set that didn’t look as good as when I put it in. I have MW light-weight steel spool and billet main cap, MW 40-spline Gun-drilled axles. All circa 1998. Calvert makes CM perches for $100 a pair.
NHRA SS/H
1970 AMX
390 4-speed
Advanced Clutches
Red Line Racing Cams

Post Reply