T400 Moving in neutral

Transmission to Rear-end

Moderator: Team

Posts: 509
Joined: Sat Aug 13, 2005 8:49 am
Location: NE.Phila.

T400 Moving in neutral

Postby oldhead » Sun Feb 12, 2017 11:56 pm

I just put my ATI T 400 in after renewing the clutches.....I always use park to check the locked timing running it up to 5000 or so. But park must need a adjustment back at rear of the case. Some times it slips and clicks. It felt locked so i ran it up to 5000 and it jumped and moved so I tried neutral and it creapped at 3000m up....I think the creap is normai ????Oldhead
Quicker then most

Posts: 80
Joined: Thu Feb 11, 2010 2:00 am

Re: T400 Moving in neutral

Postby 406shark » Mon Feb 13, 2017 6:10 pm

Check your shift cable adjustment.

What shifter are you using? I had a similar problem years ago. Now I always put mine in true neutral... then adjust the cable. No problems after doing it that way.


Return to “Driveline”

Who is online

Users browsing this forum: No registered users and 5 guests