700r4 case ports

Transmission to Rear-end

Moderator: Team

Post Reply
User avatar
BOOT
Guru
Guru
Posts: 1321
Joined: Fri Apr 09, 2010 6:23 pm
Location: Michigan

700r4 case ports

Post by BOOT » Sun Dec 25, 2016 8:46 am

Does anyone have a diagram or can list the case pressure ports of a 700r4
I know as much as I can learn and try to keep an open mind to anything!

If I didn't overthink stuff I wouldn't be on speedtalk!

Fireonthemountain
Member
Member
Posts: 120
Joined: Sat Mar 19, 2016 11:17 pm

Re: 700r4 case ports

Post by Fireonthemountain » Tue Dec 27, 2016 9:34 pm

You mean like this??

http://www.hotrodders.com/forum/700r4-f ... 02755.html

http://www.tciauto.com/tc/trans-line-pressure/

The pressures will vary with who did it and how, and what parts they use.

User avatar
BOOT
Guru
Guru
Posts: 1321
Joined: Fri Apr 09, 2010 6:23 pm
Location: Michigan

Re: 700r4 case ports

Post by BOOT » Wed Dec 28, 2016 8:05 am

I mean like what port will test a certain gear, for example because of a vid I know what one is for 4th on the 700r4 and found a pic where they listed all the ports for a th350, no luck finding a pic or diagram of a 700r4
I know as much as I can learn and try to keep an open mind to anything!

If I didn't overthink stuff I wouldn't be on speedtalk!

Fireonthemountain
Member
Member
Posts: 120
Joined: Sat Mar 19, 2016 11:17 pm

Re: 700r4 case ports

Post by Fireonthemountain » Wed Dec 28, 2016 12:09 pm

Only one test port I know of on the 200R4 and the 700R, and that is the drivers side in front of the linkage and up a little, just as the links I posted said. All gears are tested for correct pressures from there.

User avatar
BOOT
Guru
Guru
Posts: 1321
Joined: Fri Apr 09, 2010 6:23 pm
Location: Michigan

Re: 700r4 case ports

Post by BOOT » Wed Dec 28, 2016 3:08 pm

Thx but not what I meant, on the pass side there are a few ports, one had pressure in 4th and others idk
I know as much as I can learn and try to keep an open mind to anything!

If I didn't overthink stuff I wouldn't be on speedtalk!

Greenlight
Pro
Pro
Posts: 378
Joined: Wed Feb 16, 2005 10:37 pm

Re: 700r4 case ports

Post by Greenlight » Wed Dec 28, 2016 9:16 pm

Is this what you are looking for?

Image
Project Greenlight

Post Reply