700r4 shift

Transmission to Rear-end

Moderator: Team

Post Reply
User avatar
BOOT
Guru
Guru
Posts: 1345
Joined: Fri Apr 09, 2010 6:23 pm
Location: Michigan

700r4 shift

Post by BOOT » Sun Oct 30, 2016 2:06 pm

Ok I've know there is the corvette servo and a shift kit of course but recently read something bout a accumulator valve kit? Is that something included in the Tran go kit or separate? If not would you use all 3 together?
I know as much as I can learn and try to keep an open mind to anything!

If I didn't overthink stuff I wouldn't be on speedtalk!

Greenlight
Pro
Pro
Posts: 383
Joined: Wed Feb 16, 2005 10:37 pm

Re: 700r4 shift

Post by Greenlight » Sat Nov 12, 2016 1:44 am

Sonnax will have any of the parts you need:

http://www.sonnax.com/units/213-4L60
Project Greenlight

Pro Built Automatics
New Member
New Member
Posts: 5
Joined: Tue Jan 24, 2017 1:03 am

Re: 700r4 shift

Post by Pro Built Automatics » Sun Jan 29, 2017 6:21 am

When using the TransGo Junior Shift Kit, the "A" or "B" accumulator valve in the valve body will work best with the over and under 2nd accumulator spring setup that TransGo uses here. The "M" or "L" accumulator valve works best with the under accumulator spring that the factory uses. Spend the money on the Shift kit instead of the Sonnax accumulator valve kit, you will get much more out of it. This kit can be made into a Heavy Duty Shift kit easily. Add the Corvette servo, .471" main boost valve, .296" intermediate/reverse boost valve and my modified Shift kit instructions.

Post Reply