700r4 shift

Transmission to Rear-end

Moderator: Team

User avatar
Posts: 1298
Joined: Fri Apr 09, 2010 5:23 pm
Location: Michigan

700r4 shift

Postby BOOT » Sun Oct 30, 2016 1:06 pm

Ok I've know there is the corvette servo and a shift kit of course but recently read something bout a accumulator valve kit? Is that something included in the Tran go kit or separate? If not would you use all 3 together?
I know as much as I can learn and try to keep an open mind to anything!

If I didn't overthink stuff I wouldn't be on speedtalk!

Posts: 378
Joined: Wed Feb 16, 2005 10:37 pm

Re: 700r4 shift

Postby Greenlight » Sat Nov 12, 2016 1:44 am

Sonnax will have any of the parts you need:

Project Greenlight

Pro Built Automatics
New Member
New Member
Posts: 5
Joined: Tue Jan 24, 2017 1:03 am

Re: 700r4 shift

Postby Pro Built Automatics » Sun Jan 29, 2017 6:21 am

When using the TransGo Junior Shift Kit, the "A" or "B" accumulator valve in the valve body will work best with the over and under 2nd accumulator spring setup that TransGo uses here. The "M" or "L" accumulator valve works best with the under accumulator spring that the factory uses. Spend the money on the Shift kit instead of the Sonnax accumulator valve kit, you will get much more out of it. This kit can be made into a Heavy Duty Shift kit easily. Add the Corvette servo, .471" main boost valve, .296" intermediate/reverse boost valve and my modified Shift kit instructions.

Return to “Driveline”

Who is online

Users browsing this forum: No registered users and 2 guests