Torque Converter Heat

Post by **speedtalk** » Mon Mar 22, 2004 3:45 pm

Ok, I'm obviously on the street kick. Will an 8" converter (5000 stall) live on the street with a moderate size trans cooler?

tk · Post by tk » Tue Mar 23, 2004 9:07 pm

speedtalk wrote:Ok, I'm obviously on the street kick. Will an 8" converter (5000 stall) live on the street with a moderate size trans cooler?

If you use a good quality 8" with a big cooler you should be fine Don

Turbo-Action make good convertors , so does ATI!

Post by **speedtalk** » Tue Mar 23, 2004 10:59 pm

tk wrote:If you use a good quality 8" with a big cooler you should be fine Don

Turbo-Action make good convertors , so does ATI!

Thanks Tom! Haven't seen you on the board lately

cstraub · Post by **cstraub** » Thu Mar 25, 2004 10:20 am

Don,
One thing I have learned from Joe is that our fabricated tranny pans will disapate the heat quicker compared to the deep sump cast stuff. May keep that in mind whether it is ours you use or someone elses.

Chris

Guest · Post by **Guest** » Thu Mar 25, 2004 9:04 pm

speedtalk wrote:
tk wrote:If you use a good quality 8" with a big cooler you should be fine Don

Turbo-Action make good convertors , so does ATI!
Thanks Tom! Haven't seen you on the board lately

Yeah real busy...all the folks here just woke up and realised spring is here

I see you have action

tk · Post by tk » Thu Mar 25, 2004 9:05 pm

[Yeah real busy...all the folks here just woke up and realised spring is here

I see you have action

[/quote]

Oops forgot to log in

Speed Talk

Torque Converter Heat

Torque Converter Heat

Re: Torque Converter Heat

Re: Torque Converter Heat

Re: Torque Converter Heat

Re: Torque Converter Heat