Engine Masters 2019

Open

Moderator: Team

Post Reply
Walter R. Malik
Guru
Guru
Posts: 4284
Joined: Tue Jul 24, 2012 11:15 am
Location: Roseville, Michigan (just north of Detroit)
Contact:

Re: Engine Masters 2019

Post by Walter R. Malik » Wed May 22, 2019 10:16 am

I guess that no one else in that contest is a member at SpeedTalk ...
Or, they think their combination is so unique that they want to keep it a secret. :roll:
http://www.rmcompetition.com
Specialty engine building at its finest.

czar racing
New Member
New Member
Posts: 3
Joined: Sun Sep 10, 2017 11:18 am
Location: Houston, TX

Re: Engine Masters 2019

Post by czar racing » Sun May 26, 2019 2:55 am

My apologies for a late response, I have not been on the computer in a while. I was accepted with a 327 SBC.

Chris Pelczar

Joe-71
Member
Member
Posts: 78
Joined: Sat Apr 08, 2017 5:46 pm

Re: Engine Masters 2019

Post by Joe-71 » Thu Jun 13, 2019 12:59 pm

Has anyone had ANY communications with EMC as of late? ANYTHING? Some updates would be appreciated about who is in the competition, what fuel will be used for sure, any rule changes, or updates. Joe-71

Mummert
Pro
Pro
Posts: 200
Joined: Mon Aug 06, 2007 4:24 am
Location: El Cajon CA

Re: Engine Masters 2019

Post by Mummert » Thu Jun 13, 2019 5:55 pm

Has anyone got a confirmation on wether or not the heat cross over in the exhaust ports can be filled?
Mummert Machine and Development 4 stroke hp
Mummert Y-blocks

Walter R. Malik
Guru
Guru
Posts: 4284
Joined: Tue Jul 24, 2012 11:15 am
Location: Roseville, Michigan (just north of Detroit)
Contact:

Re: Engine Masters 2019

Post by Walter R. Malik » Thu Jun 13, 2019 9:04 pm

Mummert wrote:
Thu Jun 13, 2019 5:55 pm
Has anyone got a confirmation on wether or not the heat cross over in the exhaust ports can be filled?
The rules never specifically addressed this so, they certainly do not say you can't, as long as it does not extend into a port.
http://www.rmcompetition.com
Specialty engine building at its finest.

Post Reply